Question about Philips MFJET 500 All-In-One InkJet Printer

1 Answer

Replacing toner on mf-jet 500 philips fax

How i replace the toner???? i dont know what 2 open and how

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

This link gives you the user manual for mfjet 500 - page 23 for cartridge changing (Sagem have bought fax support from Philips) http://www.sagem.com/support/site/livret/um_mfjet500_uk.pdf When you get a new cartridge there are usually very detailed instructions on the packet too Hope this is what you need, if not then contact Sagem on http://www.sagem.com/support :)

Posted on Feb 28, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's E00025-2c0


Error in Cover Sensor (PS14) in M Toner Container

Description Unable to detect opening of the Toner Container Inner
Cover when removing the Toner Container.
Remedy Identify the cause of the error whether it is due to link
mechanism to open the Toner Container Inner Cover or
problem at the Toner Container Inner Cover Sensor side. ?
1. Perform the user mode (Adjustment/Maintenance>
Replace Specified Toner) to check if the Toner Container
Inner Cover opens normally (damage, slide of shaft area,
etc.). ?
2. Check if the Toner Container Inner Cover Sensor is
soiled and the installation of the sensor. ?
3. Check the service mode (COPIER> I/O> DCON> P024
bit9) to see that the output value of the Toner Container
Inner Cover Sensor is changed normally when opening/
closing the Toner Container Inner Cover. ?
If it is normal, the value becomes 0 by rotating the Set-on
Drive Shaft with the attached tool and opening the Toner
Container Inner Cover. When closing the Toner Container
Inner Cover by hand, it becomes 1. ?
3-1. When the Toner Container Inner Cover is not opened
although the Set-on Drive Shaft rotates, check the drive
system from upstream (Set-on Drive Unit -> Hopper Unit
-> Bottle Base Unit -> Toner Container Inner Cover Unit). ?
If it is damaged, replace the damaged part and then
perform step 5 and later steps. ?
3-2. When the output value is not changed normally
although the Toner Container Inner Cover can be opened/
closed, check the Sensor Harness (to see if the harness
is caught, disconnected or physically removed, *including
the Relay Connector). ?
If there is no problem, replace the sensor. After checking
the output value in step 3, perform step 5 and later steps. ?
4. If the problem is not solved by replacing the foregoing
parts, replace the Drum Driver PCB (UN4) and then
perform step 5 and later steps. ?
5. Clear the error in service mode (COPIER>
FUNCTION> CLEAR> ERR), and then turn OFF and then
ON the main power. ?
6. Replace the toner (reinstall the removed Toner
Container) at least once in user mode (Adjustment/
Maintenance> Replace Specified Toner), and check that
toner replacement can be performed normally.

Sep 24, 2014 | Canon imageRUNNER ADVANCE C5051

1 Answer

Replaced toner cartridges magenta, yellow cyan printer display now says replace cyan cart. i have reloaded and even put in the old one i even replaced the drum with the pevios one. same message


Hi Camru,

Can you tell me the exact model of Cyan toner you are using as there are two for this model a high and a low capacity one, and I also would like to know if you are using original brother branded toners or refill or aftermarket/non brother/"for use in toners". If you are using after market toners then the toner itself is probally faulty, these machines dont just sence new powder they look for a new chip to tell machine it has had its toner replaced, then the chip is blown so it cant reset the machine again, refillers have to put in a new chiop and powder if the chip they use fails then it doesn'r reset the machine, exactly like your problem.

If your are using brother branded original not refilled toners then we could have other issues so please then try the following. Please ensure the contacts on the drum and coresponding ones on the front door are clean. Gently tiny wipe metal wire contacts with a lint free cloth or a cotton bud with metho/alcohol, dont bend them they are delicate, see pic at end for location

Please also try to reset the toner manually, do this by openning front door and pressing clear/back button, a menu will appear, we want to select C-TNR-S or C-TNR-H depending on if you are using Cyan/TonerStandard or Cyan/Toner/High Capacity, so use arrows to go to correct one then press ok to select it, then a new menu appears, we want to select 1 asnd ok to reset, then it should just go back to cover open.

Also you could let me know what code comes up if you press menu * 2 8 6 and 4 real quick!!, if you do fast enough its tricky but then you should see maintence in display and it will beep, then select 82, and it will show eroor ?? let me know the code...also try to do a 80 it will print out a code sheet that I would normally read to identify problem, and finally in maintence mode select 99 to perform reset, you machine should go back to normal and out of service mode.


Hope this helps, or if required give me more detailed info and we will dig deeper.

Cheers

Soulvisitor






Contact locations10_17_2011_2_10_25_am.jpgn

Oct 17, 2011 | Brother DCP-9040CN Laser Printer

1 Answer

I have a problem with my kyocera 4035.i dont know how to open the toner's box.


Open the front cover. Lift the blue lever and pull out the black toner container

Jan 05, 2011 | Office Equipment & Supplies

2 Answers

Dear sir, my toshiba e studio machine some time showing "dispose used toner" . I thing that means tonner is finished. there have 4+1 toner which we need to replaces Idon,t know. Please help me


Dear,
your copier e-studio 350 some time showing '' dispose used toner'' It dont mean you install new toner... its mean you dispose used toner box.. Dear open the copier frant cover
and dispose used toner white box...
Thanks
Best Regards,

Aug 05, 2010 | Toshiba e-Studio 350 Copier

1 Answer

Panasonic DP C262 replace toner waste container


The waste toner container is the box in the front of the drums, you see it when you open the door its a box that collects used toner. You need to go to pansonic dealership and get a new box to replace the full one.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Sep 01, 2009 | Panasonic Workio DP-3530 Copier

1 Answer

I have just replaced toner however an AP sign appears now. I have added paper to the tray (as i have no manual I dont know what AP is asking me to do) Can you please help


hi 

AP means that the toner in the hopper got so low that you will need to cycle the toner several times.

to do this you will need to open and close the front cover between each cycle to ensure enough toner is in the system

Aug 03, 2009 | Kyocera KM-1505 Copier

1 Answer

My HP 1320 prints a thick black line down the left side of each page of a document.


Easiest step to do would be replace your toner.
Next Step is 1/2 self test page. This means start a print job and after the paper is picked up open the toner cartridge door and cause a jam. The paper that you see after you remove the toner will show the current print. If the mark is seen on the paper there then it is the toner cart. If you dont see it on the paper then it is most likely your fuser causing the issue.

Jul 27, 2009 | Office Equipment & Supplies

2 Answers

Canon imagerunner c2880 (GPR-23)- Waste receptacle


i dont know about any counter to reset,the message is displayed when there is waste toner in the sensor window of the waste toner bottle.That window can also be cleaned.

Jun 09, 2009 | Canon imageRUNNER iR C2880 Color Copier

1 Answer

Toner cartridge needs replacing in brother hl-20


if you want to replace your toner,
First you just need to open your front cover and pull out the toner and drum.
after that, push down the blue buttom on drum and pull out the toner. Then replace the new toner into the drum.
finally, just push back the drum and toner back into the printer.

Apr 01, 2009 | Brother HL-2040 Laser Printer

Not finding what you are looking for?
Philips MFJET 500 All-In-One InkJet Printer Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Ekse

Level 3 Expert

13434 Answers

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers

Are you a Philips Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...