Put new ep windows in and have no sound

this mother board uses a S3 Graphics UniChrome Pro IGP onboard video.

look for three pins on the mother board with a jumper it should say reset or cmos reset put it on the other two for about 8 seconds put it back on the other two and start it up

Hi,

This EP-4T2A3 is unique, that the can only utilize the slightly more expensive RDRAM memory modules. Furthermore, because of the dual memory controllers in the i850 chip-set, all motherboards based off of this chip-set must also have its RDRAM installed in pairs. You can purchase RAMBUS chips of PC600 to PC800 memory modules. You have 4 RIMM slots, and they must be installed in pairs, or you will get speeds of only a single module. The unfortunate part is that the RDRAM modules are a little more pricey. You can find some samples of these HERE.

Good Luck

Mark

u must replace ur mother board coz there is problem of power section of motherboard. if u tring to solve problem on same mother board . processor may be also going dead so avoid R&D and plz replace motherboard otherwise u must send ur motherboard at my service centre in india . u can mail me at my mail id [email protected] . enjoy good luck plz vote on my comments

Hi - You can download the software by clicking the link underlined in blue below:

ep-4plai-a

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

You can upgrade your BIOS from www.elitegroup.com

itJSN

http://driverbyte.com/ntel-desktop-board-d101ggc-sound-and-agp-driver-wi_freedownload/
Try the above site contains about 5 different sound drivers for d101ggc motherboard

Hi debong,
click on this EpoX driver link for you're EP-4PDA3i motherboard.
(Sorry EpoX does not seem to have a bundled driers. You have to download single drivers, one at a time).
http://www.epox.com/USA/downloads.asp?class=DRIVERS&item=EP-4PDA3I

Main Web site for EP-4PDA3i
http://www.epox.com/USA/product.asp?ID=EP-4PDA3I

Good Luck!
Mike

Download from this link for EPoX EP-8K9A7I.
Fill in (File type & Model).
http://www.epox.com/usA/downloads.asp

Enjoy!

Mike

there is no solution. epox sux!!!!!