Question about Konica Minolta bizhub C250 All-In-One Laser Printer
In the Utility Menu you can set the default settings for most functions. Set the copier to the state you wish it to be in. Under the utility menu there is a default setting button. This will allow you to set the current state to the default as well as reset to factory default.
Posted on Jan 08, 2008
If you still have problems or cant change to multiple scan.
1.you have to get in the simulation mode because machine doesnt know if the HDD installed is in.
*simulation utilty counter =details stop 00 stop 01
2. ONCE YOUR IN LOOK FOR SYSTEM 2 AND CLICK ON HDD YOUL SEE THAT HDD IS NOT INTALLED SO CLICK INSTALLED AND THEN EXIT END AND REBOOT THE PRINTER AND TRY TO SCAN AND IT WILL WORK
THUMBS UP IF IT WORK FOR YOU
Posted on Mar 21, 2013
Select separate scan in scan setting screen, select utilities, user settings, initial settings, current settings.
Posted on Mar 09, 2008
Posted on Oct 29, 2007
Http://www.biz.konicaminolta.com/km/colour/c250/ Here is a site you may want to bookmark. This will allow you to keep up on updated drivers etc. Good Luck, Tim
Posted on Feb 28, 2007
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: