Question about Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher
My Dishwasher stopped working completely and while trouble-shooting what I thought to be a power issues after a plumbing problem we had, I noticed that where the power comes into the unit what I believe to be the converter, I get power on both legs hot & neutral. Does this mean that I need to replace the converter/Inverter whatever it is called.
Power on, drains clear but no water entering durining cycles?
Posted on Dec 20, 2008
My model # is MDB5130AWQ
I don't think that the top sprayer is working correctly, if at all. Is there a way to check that? The top dishes don't get clean and there is still dishwasher detergent in the cups after the cycle is finished.
Posted on Aug 16, 2008
Tix, make sure the float assy. is not stuck in the up position. If that is ok, check the door latch switches for proper operation. Behind the toe panel on the bottom there will be a tech sheet that will show you how to put it in the service mode. Catriver...post back.
Posted on Mar 01, 2007
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: