Question about Mitsubishi WD-65738 DLP TV

3 Answers

Wd65738 flickering The lamp went out and i replaced it with a new one. Now the tv works fine for a few minutes then starts flickering green and purple tints. On the welcome screen that is normally blue also flickers white bluish greenish.

Posted by on

  • 1 more comment 
  • dcybul
    dcybul Jul 10, 2012

    Also there is a tick noise in the back

  • dcybul
    dcybul Jul 10, 2012

    and also the shuts off after about 5 min of flickering

  • dcybul
    dcybul Jul 14, 2012

    UPDATE: Replaced color wheel and still has the same issue

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 13 Answers

I had a TV do that about a year ago, the repair man said it was the color wheel inside the tv. I changed the bulb to see if he was BS'ng me and eventually got the manufacturer to send a color wheel and I change it myself, was very easy...TV works fine ever since. Hope this helps

Posted on Jul 10, 2012

Testimonial: "Thanks i took the tv apart and got to the color. When you spin it with your finger it should spin for a bit correct? Mine spins for about half a second."

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I replace color wheel and the chip know i have the control light blinking one red and 7 yellow
please i need help to know how to fix it thank you

Posted on Jul 13, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

My bulb went out. I replaced it then a couple days later it started flickering. I bought another color wheel it worked for an hour then stated doing it again. It makes a notice when this starts flickering like a humming noice

Posted on Sep 19, 2014

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

digitaldump

  • 115 Answers

SOURCE: Projection tv flashes green and purple tints

Find your reciept then call mitsubishi . if you purchased it less than 3 years ago mitsubishi will pay to have the expensive light engine replaced.

Posted on Oct 05, 2009

Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: blue screen with flickering horizontal lines

Sounds like the 1000uf capacitors on the FMT board need replacing. This is a common symptom with that chassis. There are three 1000uf caps that fail on that PC Board

Posted on May 23, 2008

Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: I have Mitsubishi WD-62525. Last

that is a common problem with that model you will need the v26 power pwb repair kit and the V26 FMT pwb repair kit. You can get both kits at the following link which includes the replacement capacitors and instructions on where the capacitors are located. Heres the link.
http://servicemanuals.vstore.ca/

Posted on Sep 26, 2008

Slinteriors

Sonny Berry

  • 8617 Answers

SOURCE: no picture or sound mitsubishi 62525

Capacitor failure is the most likely scenario the FMT ans Signal PWB would cause the picture interference and the power pwb would cause the lamp light to turn red and give a 34 code when the device/ input and menu buttons are pressed in together and held for five seconds. That chassis has issues with every board in the chassis having failed capacitors you can get repair kits for the V26 chassis at the follwing link that come with instructions. Your model is the V26 chassis. Heres the link.
http://servicemanuals.vstore.ca/

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When you turn of the TV the POWER indicator flashes green for several minutes. The TV never comes on. After the several minutes of the POWER indicator flashing green, it stops, I hear a click and the...


A continuous flashing red light with the word LAMP on it would definitely mean you're going to need to spend a few bucks on a new lamp....or for a few more, upgrade to a TV from this century that doesn't require lamp changes :)

May 11, 2011 | Panasonic PT-52LCX66 Projection Television

1 Answer

When I power up the TV, the fan turns on and I get the green blinking timer light as usual. Once the light turns off I manually boot the TV with the bypass switch and hear the second fan start up but the...


I would suggest it is a ballast problem. You can check supply of 5 volts to ballast's small 5 pin connector (trigger voltage) and about 300V-330V to large 2pin connector. If both voltages present at the start and lamp is working with in another TV - it is bad ballast.

Aug 11, 2010 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Replaced bulb 1 month ago, work fine, recently picture started turning green and purple very distored then tv would shut off. Now tv will try to start you hear sound but no picture, tv will not shut off.


hello,
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Have you studied your manual on lamp replacement? See Here:

ehow.comreplace-bulb-panasonic-hdtv
as well as in your manual. Sometimes the lamp must be reseated
by removing it and reinstalling it with great care making certain
the door and all the gaps are closed tight.

If the lamp replacement or reinstallation does not solve the
problem you will likely need a service tech to look at the tv
as there are few user serviceable items for Plasma sets. Most
of the repairs are done by computer connection that downloads
the error messages and interprets what went wrong.

Hope this helps.


May 24, 2010 | Samsung HLN4365W 43" Rear Projection...

1 Answer

32" 32lc7d after a few minutes, flickers, then goes dark.


There are no fans in this model but it looks like either the backlights in the screen are breaking down after they have warmed up or a problem in the inverter board, again part of the driver circuit breaking down after a period of time. They inverter boards can sometimes be replaced seperatly but usually come with a new screen which if the backlights are at fault then the screen would need to be replaced.

Feb 04, 2010 | LG 32LC7D Television

1 Answer

I have a 46' viore ipt46dl30 and when it turns on all the screen is really flickery. and most the colours come up purple, but this goes away for about 5 ten minutes and the flickery purple screen comes...


Viore ipt46dl30
Same problem, cleaned color wheel, put a few drops of wd40 on bearings, worked good for two months.
Started flickering again, need to replace color wheel.

Feb 03, 2010 | GRY Viore RPT50V24DHD 50" HDTV DLP TV

2 Answers

Mitsubishi WD-62827---PICTURE TURNS GREEN


I had the same problem. I deducted that if my TV worked fine for an hour or so and then the colors became bad (green, people's faces purple...), it must be a overheating problem. Simple logic, right? So, I picked up a few tools and a small vaccum and went to work.
I went first for the main source of heat: The lamp. Just a few screws, and I removed it. The lamp cage has a fine screen to prevent the dust to cover the lamp. Mine was covered with dust! And the fan behind the lamp was also covered with dust! Bingo!!! That's my problem! I cleaned everything and vaccumed all the air vents on the the back of the TV. I put the lamp back and checked that the fan was working. The TV works like new since!
Before you are out of a TV for days and spend an arm and a leg for a "Technician" to fix it (replacing expensive parts that didn't need to be replaced in the first place), try what I described above first. It's very simple and it takes only 15 minutes.
Since my TV is 2 1/2 years old, I purchased a replacement lamp. I know that one of these days it will burn out. I'll be ready and my TV will be working again in 15 minutes!
Since my problem was solved, I didn't go to the next step. There must be one or two other cooling fans inside the TV, but they must be working...
Good luck,
[email protected]

Oct 06, 2008 | Mitsubishi WD-62827 62" Television

4 Answers

Tv cuts off and green light flashes


Yup, it seems a lamp problem can give a blinking green light over the 10 times (1 - 10 times for diagnostic codes), but in my case rather than replace the bulb if it works for a minute then resets with the green light blinking, do what I did.
Take the lamp out and inspect it, it has breather screens top and bottom, if it cant breath because there clogged with dust, clean them, and you can remove the screens, use q-tips and clean the inside. I saved the cost of a lamp and it's working fine!

Jun 27, 2008 | Sony Grand WEGA KDF-55XS955 55" Rear...

Not finding what you are looking for?
Mitsubishi WD-65738 DLP TV Logo

1,271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...