I lost my user manual and reote

You should use the search remote code feature:

1. Hold the device button you want to program for 3 seconds & release.
2. Push & release the power button & the red light will remain lit.
3. Push the CHANNEL UP button over & over slowly until the device turns off.
4. When device turns off press OK button.

Hopefully that works for you.

Check your cable connection on both ends. Try to change the cable.

Hi, did the remote come with a manual?if it does,that means you will see the user's guide for the remote about the instruction and the different functions it has.

Also i guess the remote is not a universal remote or the reote is not the exact one for your system.It might not work properly with it...All buttons will not function properly..

Check those and get back to me..

This is a power supply problem. If the set is under warranty, exchange it.

If you warranty is expired, you can take it to a repair shop and get an estimate to see if it is worth fixing.

Here is the user manual: http://www.retrevo.com/support/Samsung-215TW-Monitors-manual/id/278ag702/t/2/

Just get an audio cable with mini stereo phone plugs at both ends, attach one end to the PC audio line out jack (Green), the other end just goes to monitor audio line in jack (green).

Good day sir/maam, there are really few manufacturers of TVs that adopted to use a remote to turn on the TV. so if the remote is lost, you cant power it on, check out your dealer if they have a spare remote, or visit any electronics depot for any universal remote that your TV is compatible with, ask the dealer if it would work on your Samsung TV.

Note: browse your user manual, if it has a secret button or a combination of buttons to power on your TV. that may help.

hi

here is the user manual

http://www.fixya.com/support/p394862-samsung_syncmaster_910mp_19_lcd_monitor/manual-3916

Do you have the remote with it? It is the PIP button. When I press that button, I get the small TV picture in the upper right hand corner of the screen.

On the front panel press the Menu button for about 5 seconds. Once you press it the OSD will pop up. Keep holding the button until the OSD disappears. The setup should be unlocked now.

This is the part number: BN59-00226A It can be ordered for $42.71 from the following site: http://www.partstore.com/GetModel.aspx?MfgName=Samsung&BrandName=Samsung&ModelNumber=241MP&PartCategoryName=&Keywords=remote&x=0&y=0