Installing sirius reciever manual

try:
http://www.manualslib.com/manual/154436/Sirius-Satellite-Radio-Sir-Pnp3.html

Go to your local autoparts store and pick up a chilton manual for your vehicle. They cost around $20-$30. It has complete instructions on how to remove your dash. It also has diagrams for the electrical system. You may need additional parts in order to install your sirius system. Those can be found at any stereo shop.

U can't change the provider, the radio's are built to recieve sirius or xm, u can't have both on the same radio.

To get your Sirius ID number from you MR-17 JBL stereo, select the Mode button until it displays "Sirius". Then push and hold the Mode button for a couple seconds and it will chirp and display 3 blank spaces. Enter three zeros, "000" in these 3 spaces. The Zero is the loud button labeled "LD". When you do that, it will display your Sirius ID number. :)

Most of the New Aftermarket Stereo's now have the Connections for Sirius and XM Built in so you just need the Sat. Install Box. Really Simple. If you want to go a Cheaper Route Just Purchase the XM or Sirius Reciever and Mounting kit for the Dash or Windshield and It will play through an Empty FM Station on the Radio Via the FM Transmitter. Got one in all of my Vehicles and they work Great!

You can lookup the SID on Sirius.com if the reciever has been activated. Customer service should have the number as well if you know the phone number used during registration.

No need to get to the back of the radio to connect this unit as it will broadcast over an fm frequency. But if you have have issues with static, you may need to install an FM Direct Adapter which plugs into the back of your car stereo where the antenna plugs in now. Professional installation is advised, but not required. If you need more specific help, let me know.

You cannot adjust the volume when the stereo cord is plugged into the back of the dock. Instead, plug the stereo cord into the front headphone jack of the dock. You will be able to adjust the volume then.

I had the same problem with invalid channel on all channels ! Had to reset the siriuss receiver by removing power for 15 sec and restoring! that means not just shuting it off but removing all power to the sirius unit not the clarion unit itself and reastablishing power to it turning on the clarion head unit and walah! satelite would recieve ESN and 184 and programing! Hope it works for you after 3 long waiting periods on the phone!