I need a new D-Link model di-624. where can I buy this?

1. You will have to use the CD that came with the router and go through the "setup Wizard" and establish a new password.
2. contact your ISP ( internet service provider0 and get the information to input into the router to connect properly to the internet.
3. Go to the D-link page and an instruction set for your model router is there to guide you through the setup.

Go to D-Link - TechSupport FAQ and start a new configuration.The wizard will help you to do the setup.

Yes and no... D-Link has put the DI-624 on the end of life list and support ends in August 2010. They say they will support it if you have a proof of purchase. Here is a link to the support page for your model...
http://www.dlink.com/products/?tab=3&pid=DI-624&rev=DI-624

Hello,

Before going out and buying a new router, you should try reseting this one.

There should be a small pin hole on the back of the router, stick a pin in there to set it back to factory settings.

You can also check the WAN connection to make sure it isn't loose.

Thanks,

Pat

hope this helps

I assume you mean firware drivers for the DI-624 Rev E?
Note*This product is End of Life as of August 01, 2007

Firware is not offered for this model if that is what you are in fact looking for.

Here is the link to your model on DLINK:
http://www.dlink.com/products/?tab=3&pid=DI-624&rev=DI-624_revE

You would be better off just getting a newer Router for around 50$

1.  Open browser 2.  Go to:  http://support.dlink.com/downloads/# 3.  In the left field, select DI 4.  In the right field, select 624 5.  Determine which version of the 624 you have (Examples are provided) 6.  Select the version you have.  This will take you to the page with the drivers and other related files for this model.

There are multiple revisions of the DI-624, each with version specific drivers, firmware, installation guides, and other resources. Please use the descriptions below to identify your revision.
The links will take you to the drivers and install guides.

Note: The revision is located on the label on the bottom of the device next to H/W

The DI-624 Rev. A has 2 antennas.
<img src=http://support.dlink.com/prod_img/revisions/DI-624v.jpg>

Driver here: http://support.dlink.com/products/view.asp?productid=DI-624

The DI-624 Rev. B has 2 antennas.
<img src=http://support.dlink.com/prod_img/revisions/DI-624_revBv.jpg>

Driver here: http://support.dlink.com/products/view.asp?productid=DI%2D624%5FrevB

The DI-624 Rev. C has only 1 antenna.
<img src=http://support.dlink.com/prod_img/revisions/DI-624_revCv.jpg>

Driver here: http://support.dlink.com/products/view.asp?productid=DI-624_revC

go to vonage and DI websites for altenative hookup guidance.

http://www.dlink.com/

Click Support

Click United States

Click Product Information

Click here (between the gray and blue bars at the top)

Under Broadband, Under Routers, Click DI-624

Use the pictures to Choose the correct revision matching the label on the bottom of the router.

Note the international DI-624+ model near the top without a picture

If not international choose A, B, C, D, E
Click on picture that matches

The resulting page contains the manual, quick start guide, firmware, how-tos, etc