Video output not working

run a switch to th neegativ and positive wires on the back of dvd playr this lets you watch movies while driving

I'm having the same problem on mine.
Could be the ribbon cable from main board to the face of radio?
I found one on pacparts.com
Im gonna order it and replace it myself...

replace de rca cable front the radio to the rear view camera

there should be a reset botton on the radio if this does not work you will have to send it to kenwood to get fixed

The problem seems to be that the video out from the kenwood head unit is either faulty or the leads from the head unit to the monitors are faulty. Have you checked to see that the head unit when playing a DVD is set on ZONE 2 so that it transfers the video signal to the headrest monitors?

Its either pink or brown. Most likely pink as most people buy the downgraded version of this player cause its cheaper. Just connect the pink wire to a chassis ground and you can play dvd's while the car is moving.

<This is NOT legal in most states I do not claim responsibility for ignorance if you do this and try watching a movie while driving.>

Other wise just connect the wire to the e-brake. Careful! That stereo drains your battery quick if you watch movies on it.

i think you find some softuare on ebay to unlock your radio....i m not 100% sure but you can take a locke

Hello ceck the format of the folders.

the double din kit was restricting it from opening properly, once i removed it from the kit it worked properly. i had to modify the kit for it to work properly!

Contact Keenwood, they may make you send it in and charge a fee. Goodluck.