I and my family recently moved from one place to another. since then my projection tv hasnt shown. i mean it will show for about 5 minutes then the picture goes out.it was fine before we moved it. what could be the problem? i tried cleraning the lenses, unplugging it , to no avail.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Howdy,
The best way to transport the TV is standing up with the front secured to a 'side' of vechile. If you don't have that choice lay the TV down on it's face. With both make sure you have plenty of moving blankets.The side would be my last resort because of stability. DO NOT LAY ON BACK!!!!
Ur DM power board have burn capacitors,check for puff up capacitors,and replace it.Tries these websites.Tv Repair World.com Shopjimmy.com Ebay.com or Partstore.com.
Hi,It sounds like the convergence is out on your tv if it has been moved recently this can cause this problem but it really needs a technician to examine it.
SUPER8
six inches will just reach the bottom of the main cuircit board. Does the units green light flash? there is no reset hutton there is a fuse. but i would suspect if it got wet then something blew
A halo effect usually means the coolant in the CRTs need replacing in the effected color usually blue goes first followed by green. red seems to be less prone for some reason.
you have lost red convergence. which ussally means one or both of the convergence amps need to be replace.. but it could be a resistor. does the red cross move up or down or side to side. how about the blue does it move in eather direction. this will let me know if both are bad
Hi.
If the convergence is out but uniformly then chances are its not electrical problem more likely to be physical see if the 3 small crt tubes are loose & can move about.
Or was your stuff insured during the move if so put in a claim.
×