Camera When I select the camera option it says "device busy try again".Then it takes me back to the option menu. Same situation with the viedo camera. The view finder of the camera never comes on.

Hi,

Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.

If the issue persists, service may be required.

Thanks,

KenSolutions

FixYa

assuming that you are talking about a memory card ..just get into view mode..and on the menu choose storage ..than options and clear memory card ..or ..just again in view mode..choose a picture and options and when you try to delete will ask for multiple delete ...select them all and delete ..or just insert the card into a card reader and when it shows in the my computer folder open it ..select all pictures and than press delete ..
the fastest way though is to simple select in the main menu the storage ...in there select card ..and on options format card ...this will erase all on it ..and format it in the same time for best performance in the device ..

Hi,

Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings 1 Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.

If the issue persists, service may be required.

Thanks for contacting FixYa.

-Turn On camera
-press Menu and go to setup
-Under setup look for Choose image storage and switch to internal Memory
-Now if your image storage set into Internal memory, Press menu again to exit menu settings
-Press review button for you to able to see picture from internal Memory
-now Press menu again while viewing the slected picture that you want to transffer
-It will provide option PICTURE/ALL/EXIT
-If you want to transffer all the picture select all
-If you want to trnasffer selected picture select picture.

Note: You need to set your Image storage into AUTO so you can use your memory card to take and view picture

Thanks for the assistance. It is a problem that the mfg will have to fix.

One configuration option for the F700 is to turn off the LCD when taking pictures and use the view finder-- this saves battery power. If you press the DISP button to the right of the LCD should turn on.
.
To turn the LCD back on-- Press MENU/OK (you should see the SELF TIMER screen). Press RIGHT ARROW to select the SET option. Press UP ARROW to select the SETUP option. Press MENU/OK. You should see the SET-UP screen. Use the UP/DOWN Arrows to navigate the options; use the LEFT/RIGHT Arrows to cycle through the options. The IMAGE DISP and the LCD options control when the LCD is powered on.

Hi,

Yes and in several methods as below listed. Since your posting refers to a generic problem for all digital cameras and not only an Olympus FE-230, some of the settings may have a different nomenclature or button name.
1. When you download pictures to you PC, rather than copy, select move; or
2. If you want to erase one picture at a time from the camera - press on the power button, then menu button, once menu is displayed, arrow down/up, you will be asked to erase the picture displayed, select yes/no by up/down, then press OK (menu button); or
3. If you want to erase all contents of the memory card of the camera - press on the power button, then menu button, once menu is displayed, arrow right, down to select card, right to select card setup, right to enter card setup, arrow down to select format or erase all, OK. Erase all just erases the files, format erases all and re-initialize the memory card; or
4. Remove memory card from camera and insert into a memory card reader attached to USB of your PC. The memory from the camera will be treated as a removable device and you can view, move, copy, delete/erase, format. This option seems to be most effective in viewing all contents under Windows Explorer with the view setting set to Thumbnail.
5. Connect the camera via the supplied cable to any USB port of your PC. The camera will be treated as a removable device and you can view, move, copy, delete/erase, format. This option seems to be most effective in viewing all contents under Windows Explorer with the view setting set to Thumbnail.

Specifically for an Olympus FE-230:
1. Press the < or > buttons to display the picture you want to erase;
2. Press the trash can button (bottom right);
3. Press the UP button to select [YES], press OK;

or

To erase all:
1. Press the MENU button to display the top menu in playback mode;
2. Select [ERASE], [ALL ERASE], and press OK;
3. Select [YES], and press OK

Hope this be of help/idea. Pls post back should you need additional information.

Good luck and kind regards.

Hello, please take the batteries out from the remote. Best regards, Arpi

I solved this fucking problem . Is 100% a soft bug . I reflash my motorola v3x with this flash : R252211LD_U_85.97.80R_refalsh_MOTOX