Question about Toshiba 50H72 50" Rear Projection Television

1 Answer

Color is Bland--Seems we're missing red color

Have a Toshiba 50H82 purcased in 2002 and the color appears to be bland as if now the red tint is missing from the image. Any ideas on possible solutions and costs? We'd consider taking it to a repair place or trying to fix ourselves if simple. Thanks a bunch. cathy

Posted by cathy hill on

Ad

1 Answer

Anthony Hilton

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

THE PROBLEM IS THE SAME AS I HAD PREVIOUS,A PROJECTOR BULB HAS GONE ON THE RED PROJECTOR,YOU PROBABLY HAVE YOUR SOLLUTION BY NOW I HOPE SO ANYWAY.

Posted on Jun 27, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Brand new printer photos look bland and"unsharp"very dull color checked color shades but not using brother paper does this matter?

Make sure the cartridges are proper and there is no dust on nozzle just clean with tissue paper and also use brother photo quality paper that is special type paper use that.

Hope this helps. Please rate my response.
Thanks.
Have a good day

0helpful
1answer

Color appears out of alignment. The set has

Replace the STK392-110 Convergence ICs and the 6 1.8 ohm 1watt resistors. You can get the repair kit whcih also contains the instructions from www.tvrepairworld.com
0helpful
1answer

Samsung HD Plasmhp-s4253 has developed some color issues. The

I had this same problem and one of my component cables was slightly unseated. Slight push back in and got all my wonderful blues back!! Thanks tvtek for this suggestion!
0helpful
1answer

Color is weird.

Component Video Jack was loose.
5helpful
2answers

Picture calibration settings for 42lg70

Picture Menu
Picture Mode: Expert1
*Backlight: 16
*Contrast: 83
*Brightness: 53
Sharpness: 50
*Color: 55
*Tint: 0
Expert Control
  • Fresh Contrast: Off
  • Noise Reduction: Medium
  • Gamma: Medium
  • Black Level: Low
  • Real Cinema: On
  • TruMotion: Low
  • Color Standard: HD (N/A w/HDMI)
  • White Balance: Warm
  • **Method: 10-Point IRE
    • 10 IRE
      • **Red: 1
      • **Green: 2
      • **Blue: -16
    • 20 IRE
      • **Red: -6
      • **Green: 0
      • **Blue: -7
    • 30 IRE
      • **Red: -5
      • **Green: 0
      • **Blue: -4
    • 40 IRE
      • **Red: -8
      • **Green: 0
      • **Blue: -4
    • 50 IRE
      • **Red: -4
      • **Green: 4
      • **Blue: -4
    • 60 IRE
      • **Red: -6
      • **Green: 6
      • **Blue: -5
    • 70 IRE
      • **Red: -8
      • **Green: 3
      • **Blue: -10
    • 80 IRE
      • **Red: -8
      • **Green: 7
      • **Blue: -16
    • 90 IRE
      • **Red: -9
      • **Green: 5
      • **Blue: -18
    • 100 IRE
      • **Red: -10
      • **Green: 4
      • **Blue: -9
Color Management System
  • Red Color: 0
  • Red Tint: 0
  • Green Color: 0
  • Green Tint: -15
  • Blue Color: 0
  • Blue Tint: 11
  • Yellow Color: 15
  • Yellow Tint: 2
  • Cyan Color: -15
  • Cyan Tint: 0
  • Magenta Color: 0
  • Magenta Tint: -1

lg70 nice tv excellent processor just to bad there is no intensity control on color management oh well still better than what the three s are pushing block out the hype lg will be number 1 in a few years haters are starting to come around and well leds coming,

p.s. i dont work for lg just tired of losers bashing stuff because they dont own it.
im isf certified those settings are right on the money straighter than a ruler
0helpful
1answer

Toshiba 50H82 blue arcing?

color shadows on numbers or letters indicate a possible convergence problem.. might be a crt deflection problem.
0helpful
2answers

Color problem

use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.
0helpful
1answer

Color fade

use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.
0helpful
1answer

Running out of Brightness

use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.
Not finding what you are looking for?

Open Questions:

Toshiba 50H72 50" Rear Projection Television Logo

Related Topics:

168 views

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Cindy Wells

Level 3 Expert

6409 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...