Seats (grey/leather) -1995 900 Turbo SE

Are the connectors actually wired the same? Check the wiring diagrams for each seat if you can find them, otherwise trace the wiring from the internal components in the seat to the connector and make sure the heaters are going to heater power pins in the original harness, and temperature sensors are going to temperature sensor pins (temperature sensors may be polarized, that is, it makes a difference which pin goes to positive and which to ground).

I think the messages are self explanatory

Check for the seat belts under the seats in that row by pulling up on the little leather or plastic handles found on the side of seat or between the top and bottom of seats. Hope that Helps.

there are some seat repair companies. that fix without replacing the leather. Here is one: www.feniceauto.com

IF YOU LIVE NEAR MEXICO YOU CAN CROSS THE BORDER AN A TAPASTRY EXPERT WILL FIX THE SEATS FOR A CHEAP COST

I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguys IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.

Hello, Have you tried pulling the belt outside the car and pressure washing it, then dry before releasing them back into the reel.
Please press the blue button to appraise my FREE! Effort.
Thank You!
Paul 'W' U.K.

I had this problem, but only on the driver's side (with leather seats). Sometimes the switch would come on, but I could not get it to go back off (and the seat would not heat).

I ended up removing the drivers front seat cover (only the bottom part), folding it back from the driver's door to the middle of the car. You also have to unplug the wiring harness underneath the seat. I found a black spot burned in the foam. This is where a wire had broken. I carefully pulled the wire together, then soldered it. I put everything back together, and it has been working ever since (about 6 months - and getting lots of use in the middle of the winter).

I think the only way to replace the heated seat wires is to replace the whole seat cover. I was glad I could fix mine by soldering it.

your heater element in the seat went bad,the dealer will have to do this because the seat has come apart the cover wether it is leather or cloth.

i have a saab 900 se conv that i am going to do the same thing. i think im just going to go with the same color, and same patterns of the old seats. i will just add some ripples, new heated seat elements, and speakers. and also i am going to look into adding vents with fans for cooling.