Question about Cyberhome CH-DVD 300 DVD Player

1 Answer

Cannot play with my chdvd-300

When I insert a DVD into the player it starts reading the disc and after quite some time it displays a question mark (?) in the same area where it displays Reading. the LED indicator near the door starts changing colours from green to red and red to green. Can anyone please help me in this matter. Most disgusted with this player.

Posted by BABU VITTAL on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

The power supply is probably bad and needs repair. Check the 5 volt output for the correct voltage and look for swollen leaky capacitors that need replaced. If the P/S is badly burned you'll have to replace it. Also, they don't last long so if you have used it a lot for a year or more the laser & motors are probably worn out and the ribbon cable connecting the laser carriage may be broken at the end. The ribbon cable can be replaced but there's nothing you can do for the motors or the laser.

Posted on Apr 08, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

MY CYBERHOME DVD PLAYER IS READING INSERT DISC AT ALL TIMES AND WILL NOT PLAY ANT DISC. HOW TO RESET CYBERHOME 300 DVD PLYER?

I am sure problem on Laser,may be it does not read any disk.So all times it say insert disk.You can better opportunity replace this damage laser.
0helpful
1answer

Cyberhome chdvd 415 does not read dvd says no disc

That might be a problem with your len which it is very popular today, try cleaning you len with a lens cleaner cd.
10helpful
2answers

Dvd player keeps saying no disc when I try to play a dvd.what can i do? worked fine until about 3 months ago. started to say no disc when disc inserted but after opening and closing 3 to 6 times it would...

dvd player keeps saying no disc when I try to play a dvd.what can i do? worked fine until about 3 months ago. started to say no disc when disc inserted but after opening and closing 3 to 6 times it would read.now it just wont read. any ideas?
0helpful
2answers

DVD powers up, reads disc, stops, then question mark shows in top right cornor.

The way i fix this, and mine does it quite often, is to either unplug it from the wall outlet and let it stand or a minute or two, or with the unit off, open the tray and close it, and it will recognise the disc then.
0helpful
2answers

DVD stopped playing all DVDs

Reset you player by doing the following:
With the player on, hooked properly to your television, and on the correct station:
Open the tray
Close the tray (with no DVD inserted)
Hold the stop button down for a full 5 seconds
The CyberHome screen should appear. You should be able to play your dvd's now.
0helpful
2answers

After loading every disc displayes "wrong disc'

are they bootleg dvd's? if not try getting a lense cleaner because wrong disc means it's reading your dvd's as .mov files which only play on quicktime in a computer. if it reads your cleaner as wrong disk too then get yourself a refund cuz it has a motherboard malfunction.
0helpful
2answers

Cannot play with my chdvd-300

See the answer to your similar post on Mar 08.
Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

86 views

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

The Knight
The Knight

Level 3 Expert

76717 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...