When I insert a DVD into the player it starts reading the disc and after quite some time it displays a question mark (?) in the samw area where it displays Reading. the LED indicator near the door starts changing colours from green to red and red to green. Can anyone p;lease help me in this matter. Most disgusted with this player.
Depending on the date of manufacutre some of this model used different parts then others and had this problem if you email me I can give you some inforamtion on a possible solution from netfirms. Some of the models had poor quality power supplies and software problems, please send me information on the software version and date of manuifacture and rather or not your unit has an AC cord that is removable without taking the cabinet part for as I will need thius information to be of further potential assistance. [email protected] Steven
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
dvd player keeps saying no disc when I try to play a dvd.what can i do? worked fine until about 3 months ago. started to say no disc when disc inserted but after opening and closing 3 to 6 times it would read.now it just wont read. any ideas?
The way i fix this, and mine does it quite often, is to either unplug it from the wall outlet and let it stand or a minute or two, or with the unit off, open the tray and close it, and it will recognise the disc then.
Reset you player by doing the following:
With the player on, hooked properly to your television, and on the correct station:
Open the tray
Close the tray (with no DVD inserted)
Hold the stop button down for a full 5 seconds
The CyberHome screen should appear. You should be able to play your dvd's now.
are they bootleg dvd's? if not try getting a lense cleaner because wrong disc means it's reading your dvd's as .mov files which only play on quicktime in a computer. if it reads your cleaner as wrong disk too then get yourself a refund cuz it has a motherboard malfunction.
The power supply is probably bad and needs repair. Check the 5 volt output for the correct voltage and look for swollen leaky capacitors that need replaced. If the P/S is badly burned you'll have to replace it. Also, they don't last long so if you have used it a lot for a year or more the laser & motors are probably worn out and the ribbon cable connecting the laser carriage may be broken at the end. The ribbon cable can be replaced but there's nothing you can do for the motors or the laser.