Sony FD Trinitron WEGA KV-34XBR910 34" TV Logo

Related Topics:

Question about Sony FD Trinitron WEGA KV-34XBR910 34" TV

1 Answer

Tv doesn't respond to commands

We have a sony fd trinitron wega kv-34xbr910. We can turn on the power using the button on the tv (not with the remote) but it will only stay on one channel. We can't change channels or the volume, nor can we get it to video/game. The remote doesn't seem to do anything at all. Any ideas as to what is wrong? Thanks!

Posted by carol smith on

  • carol smith Feb 22, 2007

    My original post was a bit unclear . . . I meant to say that we can't change channels or volume either with the remote or with the buttons on the tv itself--so it does not seem to be a problem with the remote control. What is a pcb? (Sounds serious, unfortunately.)

×

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 168 Answers

Check the battery if its still good. if not replace with new one. if its still good, open the remote and inspect for loose connection. resolder if necessary. check also for possible crack pcb. good luck!

Posted on Feb 22, 2007

  • Anonymous Feb 22, 2007

    now its clear! well pcb is printed circuit board.
    you really have a big problem on your tv. have it check with a qualified tv technician. it seem that there is a problem internally, especially the tv system control ic(integrated circuit). it may also be a loose connection (cold solder) in the remote receiver and your switches control. good luck!

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Sony FD Trinitron WEGA KV-34HS420 34" TV Stand by

I have the indentical tv and problem. Cost to repair was about 250.
0helpful
1answer

How to get into Service Mode on SONY KV-S2942U (1994 vintage)? Have entered this before using -plus & minus buttons- then switch on to get TT on screen. Entering 01 then MENU should bring up Service...

The service manual instructions to get into service mode is by turning the main power switch on the set. Then press the power button of the remote commander twice.
0helpful
1answer

My Sony Wega KV-36FV27 TV will not turn on

My sony wega trinitron will not turn on, it just clicks when i ush the power button an blinks on standby/timer
2helpful
2answers

No listing of 3 digit codes for Sony Trinitron, RCA universal rem

  1. Turn TV on.
  2. Press and hold TV button and Power button until light stays on.
  3. Release both buttons.
  4. Aim remote at TV and press the power button every 5 seconds until TV turns off.
  5. Press stop button at bottom of remote.
Lone99star

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

0helpful
1answer

Sony FD Trinitron WEGA KV-36FS120 36" TV

Apparently, channels have to be autoprogrammed first before those buttons will work.

Our TV is 4 years old but we never used the channel buttons bc it was always hooked up to DirecTv thru video input. SO when we disconnected the TV to sell, we thought it was a problem.
0helpful
2answers
0helpful
1answer

About Sony Trinitron KV-28LS36B

there are two possible defects in your circuit. 

However, if the led blinks for about 10 times your tuner is defective 90%. 

You will need a scope to check or you will need to take it in for service. 
0helpful
1answer

Sony television will not respond to remote.

battery in remote.

Many times I will 'reseat' the batteries in a remote & then it will work for a while again.
0helpful
1answer

My tv dose not turn on

replace the flyback
available from for a great price from
www.electronix.com
0helpful
1answer

Sony KV-27FS100 does not respond to remote

Good day.

Maybe there are loose connections along the IC that supports the operation of your remote. This could also hamper initial set up operation of your unit. Also, check on loose connections along the power supply.


Chris
Not finding what you are looking for?

213 views

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2351 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...