Where is the indicator light for cap lock mode

Do caps turn on/off and only the light stays on? Have you tried using the onscreen keyboard to turn it off, assuming it never turns caps off?

I don't have one of these keyboards, but there is usually a small led built into the caps lock key to indicate the lock is on, Push the caps lock key, and observe if any leds are changing state. If they are, it's the indicator led.
Otherwise, you will have to open Wordpad and type...to see the state of the key. It's possible the led isn't working, so check it's state in Wordpad.
Good luck, and hope this helps.

It is usually a little A in a padlock. the easiest check is turn them on then off and see which light changes.

Unfortunately there are no lights on the keyboard, which is ridiculous if you ask me!

You can however download a driver from the Dell website that will add a Cap Lock, Num Lock and Scroll Lock notification to the taskbar area.

You can get the driver here.

Hope this helps,

Matt

May jusy be a keyboard fault if so replace the keyboard. Also obviously you can see when you are typing in CAPITALS

it is not on the keyboard, but on a LED light on the panel, on the hinge cover.

On the keyboard, there should be an area to the right top that will light up when you click the caps lock button. Typically this key is found above the shift key on the left hand side of the keyboard.

http://www.cnet.com.au/acer-aspire-l3600_images-339286871.htm

Your EX 110 receiver has 3 indicator lights (LEDs) that display the status of the Caps lock, Function key, and the Num lock during normal operating mode. These lights will also flash when the connect button on the receiver is pressed.
LED A: Indicates that the Caps Lock (Capital lock) key is on when lit.
LED F: Indicates that the F keys are in Standard F Keys Mode when lit and in Enhanced F Keys Mode when the LED is off.

• Your EX 110 keyboard has an Enhanced F Keys Mode for F keys that provides additional functions you can program. See Knowledge Base article 9526.

LED 1: Indicates when the Num Lock (Number lock) key is on. This function allows the number pad to produce only numbers

Your EX 110 receiver has 3 indicator lights (LEDs) that display the status of the Caps lock, Function key, and the Num lock during normal operating mode. These lights will also flash when the connect button on the receiver is pressed.
LED A: Indicates that the Caps Lock (Capital lock) key is on when lit.
LED F: Indicates that the F keys are in Standard F Keys Mode when lit and in Enhanced F Keys Mode when the LED is off.

• Your EX 110 keyboard has an Enhanced F Keys Mode for F keys that provides additional functions you can program. See Knowledge Base article 9526.

LED 1: Indicates when the Num Lock (Number lock) key is on. This function allows the number pad to produce only numbers

I concur 2/3's with yooperbud.

1 = System is connected and working
A = Cap locks On= Cap lock is on. Off = Cap lock is off.
F = Function Key usage. On = I'm going to use the alternative fuctions of the F keys as programmed in the Keyboard settings. Off = Your using the standard features of the F keys.