Router causing lag after 10-20 min connected.

you know what, i have this same situation awhile ago, cant connect wirelessly, what we did was check the NETWORK KEY or ENCRYPTION KEY if it was type in correctly, it was not type correctly and accordingly. as you know this is case sensitive. try to check it first. who knows whats keeping you from the internet world is just a typographical error

Connect the Westell wireless to the Zhone as if the Westell is the PC that used to be connected to it. Then connect the PC (through any available port) only to the Westell. That's the WIRED connection. For the wireless to work, after connecting through the WIRED connection, there should be a CD that came with it that will help you configure the wireless.

1) check the wireless channel set in the Zhone 6211-I3-200 Router and to your computer. it must be the same
2) make sure you are using the wireless signal within the same floor or else your router's wireless capability will need a signal booster for wireless signals

IP Address for the Router is 192.168.1.254

connect the Zhone router to the Computer with ethernet cable

Click start - run - type cmd or command

in the Black DOS Screen - type ipconfig press Enter

it will provide you with IP Address (i.e Default gateway address)

you will need to use the power supply that came with the zhone
router......other power supplies are not interchangeable.

make sure all other items that are pluged into the other phone jacks
have inline dsl filters....do not filter the router...if you have the whole
house filter on the outside of your house you will not need to put inline
filters inside ...

make sure there are no loose connections...

last call you isp provider

they shouldnt be "locked" you can try resetting the unit on the back there should be a small button use a paper clip hold the reset down for at least 30 sec while plugged in and try again.

hi Jeffkrick.
if you go to the link you can read the manual.
when you open this link you will see the pages at the top of the page just click on the pages and it will let you read it.
Zhone 6218 I2 User Manual

hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

i have read the same problem on the supportrix forum and you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router and repeat the same steps.
note:
configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username (email address format) and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

hi, i have the same problem that cannot connect to router after i changed ip address... i set my network connection to ip address 192.168.254.2 & subnet mask 255.255.255.0 & default gateway to 192.168.254.254... i can ping ip address 192.168.254.254 but cannot get into the web browser... i cant go back the router configuration page... pls. help... my router is zhone 6218...