EXCLAMATION MARK IN THE DEVICE MANAGER

Greetings,

On a Windows Vista-based computer, the Microsoft ISATAP adapter appears with a yellow exclamation mark (!) next to it in Device Manager.
You can safely ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to work correctly.
Check out this article for more information on this:
http://support.microsoft.com/kb/932520
If this is still not working,
First try to reset Winsock from command prompt, this will reset all the Network components to default:
Click on start, type CMD,'Right click and Run as Administrator'.
At the command prompt type:
netsh winsock reset catalog
In such a case, I suspect this problem to be caused by network adapter missing or corrupt. Please firstly reinstall the driver for your wireless network adapter. Then try to reinstall Microsoft ISATAP using following steps:
1.In Device Manger, right-click the item of Microsoft ISATAP and select Uninstall.
2.Still in Device Manager, click Action and select Add legacy hardware.
3.Click Next, and select Install the hardware that I manually select from a list (Advanced), click Next.
4.Select Network Adapters and click Next.
5.Select Microsoft in left panel and Microsoft ISATAP Adapter in the right panel.
6.Click Next and finish the remaining wizard.
In such a case, I suspect this problem to be caused by network adapter missing or corrupt. Please firstly reinstall the driver for your wireless network adapter. Then try to reinstall Microsoft ISATAP using following steps:
1.In Device Manger, right-click the item of Microsoft ISATAP and select Uninstall.
2.Still in Device Manager, click Action and select Add legacy hardware.
3.Click Next, and select Install the hardware that I manually select from a list (Advanced), click Next.
4.Select Network Adapters and click Next.
5.Select Microsoft in left panel and Microsoft ISATAP Adapter in the right panel.
6.Click Next and finish the remaining wizard.


Hope this helps you to solve the issue. Please do vote or provide feedback on this solution, your response will be appreciated.

Thank you and Kind Regards
Gowtam R
FIXYA Solutions Engineer.

receive error code 31 if the device driver is not updated.

As you have already updated the device try reinstalling the device driver and check if that works, if that does not resolve the issue you may ignore the error message, below link will you go more information related to this issue:

On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP adapter appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.microsoft.com/default.aspx/kb/932520

Steps to uninstall and reinstall the device driver:

Uninstall and reinstall the device from device manger. Steps to uninstall the device:
i. Click Start, type devmgmt.msc and press enter.
ii. Locate Microsoft ISATAP Adapter device
iii. Right click on the device and select uninstall
iv. Restart the computer for the changes to happen

Uninstall and reinstall the adapter from Program and features. Steps to follow
i. Click Start and choose Control Panel
ii. In Control Panel double click on the "Programs and Features" icon.
iii. Here you can find all the programs and items which are installed in Windows Vista.
iv. To remove adapter click once on the program and then click on Uninstall/Change and follow the prompts.

hope this helps

you can try this:
Step1:

However, try the below steps to fix the issue you are experiencing:

1. Click on Start, type Device Manager in the search box.

2. In Device Manger, right-click the item of Microsoft ISATAP and select Uninstall.

3. Still in Device Manager, click Action and select Add legacy hardware.

4. Click next, and select Install the hardware that I manually select from a list (Advanced), click next.

5. Select Network Adapters and click next.

6. Select Microsoft in left panel and Microsoft ISATAP Adapter in the right panel.

7. Click next and finish the remaining wizard.

Step2:

The ISATAP is related to Internet Protocol 6.

Please check if IPv6[Internet Protocol version] is enabled on your computer to obtain an IPv6 address.

however this driver only pertains to ipv6, so your internet adapter should still function properly. if it is, you can do this:

Disable but leave ISATAP in the hardware list and go to your manufacturers Website
and check for Post SP1 Driver updates for your computers Chipset.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

i need help please help me

the yellow mark on device manager means the driver has not been installed and the driver is connected to the motherboard use your motherboard drivers CD and install them or you can download them from the net

Hi.
Let me explain you about the Microsoft ISATAP Adapters.
ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) is an IPv6 transition mechanism meant to transmit IPv6packets between dual-stack nodes on top of an IPv4 network.
It is a Windows Operating System Generic Driver.
This Driver will be installed automatically.
As this is a Windows default Driver, it has no specific functions.
As you are able to view the "yellow exclamation mark", you may just un-install the Driver..
This should not change the functionality of the Computer.
1) Right-click on the "ISATAP Adapter" in the Device Manager. 2) Then, click on "Un-install". 3) This should un-install the Driver. 4) Once you have done the above steps, restart the Computer for the settings to be enabled.
Performing the above steps should resolve the issue.
Hope this helps.
Please feel free to contact for further information and assistance.

Hi j_lorcy,

As per Microsoft, you can safely ignore this error message. The Microsoft ISATAP adapter appears with a yellow exclamation mark (!) next to it in Device Manager does not indicate a problem with the adapter. The adapter will continue to work correctly. Microsoft has confirmed that this is a problem in the Microsoft Windows Vista-based Computer or on a Windows Server 2008-based Computer.


Hope this helps.

Please post back if you have any questions or require any further assistance.

Thanks for using FixYa.

Try doing the steps outlined in these article:

http://support.microsoft.com/kb/314060

In the Control Panel, update the drivers. If still unsuccessful, delete those adapters, restart your workstation and reinstall drivers. Helpful to have another workstation nearby in case you need to download the drivers from the Internet.

No. If you have the driver for it try reinstalling it. If you don't I would delete the device and reboot. This will force the drivers to be reloaded unless they were deleted...If they were deleted and you are not very good in computers, you may need a bit more troubleshooting than on line help.