Broken Hinge I have looked on the spare parts web page for the hinge. Is the WD63 machine the same as the other WD63s/p/n so i can order the hinge?

Searpartsdirect.com or repairclinic.com

Yes, if you can find one. I would suggest you look for a broken one (spares or repairs).

Go to YouTube find how to open your washer. There is a parts diagram inside with all parts and part numbers listed.

Hi from retired Englishman in SW France,

Sorry but this forum does not supply parts or details direct; it's just made up of ordinary guys and gals, probably at home, with experience of addressing problems and giving guidance for free on the web ;-0)
Spares Suppliers
You will need to type into your search engine/web browser '(make model number) washer spares' and you should be presented with a number of sources from which you can order. Alternately you could try telephone directories for spares suppliers but I would think the former would be more successful.

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

hopes this helps heres the link for the parts:


http://www.brother-spare-parts.co.uk/page/Brother_Spare_Parts/CTGY/BROTHER_MFC8840D_MULTIFUNCTIONAL_SPARE_PARTS

Get the model number off the unit and go to sears parts on line. Good luck

Revove all screws from inside of door then it will split with aid of flat screwdriver.

Hi,

Where are you living?

Best regards
/Mirran

Hi there is a plastic band around the rubber seal to take it off you would need a small screwdriver and prise it open gently than lift off the rubber and replace the door switch to put back the band just push clip the two ends together when it is around the rim

do by mail order from uk