An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
An expert whose answer got voted for 20 times.
Re: vizio flat panel
We have seen the flexible harness that connects the segments on the display come loose from its connector several times. Try to reseat the harness if this is the case.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Start with the unit OFF and unplugged from power. Touch and hold the lower right corner of the screen with an index finger. Continue touching and holding the lower right hand corner of the screen then power the unit ON. Release the power button when the device powers ON You will see a new message: Do you really want to erase all user data? Remove your finger from the touchscreen when this message displays Touch Yes. The
device will automatically reset. Follow the on screen prompts then
place your device in an area with a clear view of the sky until it
The power button is on the back of the LCD screen in the lower left hand corner. You should power down by clicking on the Apple Logo in the upper left hand front corner and choose "Shut Down". If your screen freezes, you can power off by pushing the power button and holding it.
When you go into the split screen, and you don't want to be there, just click the little arrow in the lower right hand corner (the arrow pointing down and to the right). This will reduce the bottom map portion into a small overview box in the lower right portion of the screen. It only takes a second to get out of the split screen that way. To get back into split screen, click the arrow in the upper left corner of the overview box (the arrow pointing up and to the right).
Black Screen shows memory counting which stops at 256 Mb [is correct] Hit F10 & screen says "Setup" in bottom right hand corner-screen is still black. Floppy Drive Bay green light staying on. Regards John