Question about Hotpoint Dryers
The dryer goes for about three minutes then h2o comes on the screen even though the water bottle is empty and the dryer shuts down with beeping noise
Some one help me pls?
Posted on Jan 31, 2019
Maybe the "h2o" message is an indication that the water bottle is empty....but you already know that.
Posted on Aug 11, 2018
call bosch. they are having problems with one of the sensor in that dryer. they try to fix it but in my experiance they end up having to swap out the dryer
Posted on Nov 20, 2007
SOURCE: i have a indesit condesor
i had the same problem and found the fault to be the grey box at the rear bottom on the right hand side was full of fluff blocking the flow of water i striped the side off and removed the lower filter to gain access and there's a gully that was chocked full. cleaned everything and rebuilt switched on and all was well
Posted on May 26, 2008
Maybe trapped water in the dryer. Switch off and remove power from wall. Remove condenser unit from the dryer (clean the condenser while you have the chance with plenty of water and an old toothbrush - it will probably be filthy). With the condenser unit removed stick an old tea towel in the hole where the condenser was and then tip the dryer on its side. If there is water it will either run onto the tea towel or onto your kitchen floor OR into the water container!
It worked for me, honest...
Posted on Mar 13, 2009
There are three water reservoirs - one at the bottom behind the condenser, a second at the back bottom of the machine and then a third at the top which is the one you would normally pull out to empty.
There is a hole at the bottom of the filter in the first reservoir (at the back of the condenser) which leads to the second reservoir at the back. If the hole gets clogged up with lint/muck then the reservoir at the back does not fill up.
So to solve this, unplug the machine, take out the condenser (front left bottom of the machine) reach through to the back and mop up the spare water with a towel and check that the hole to the back reservoir - you can feel this it is towards the right side at the back of the machine is clear from muck.
Once you have cleared it, water will flow to the second reservoir and then (once you switch on the machine) up to the main removeable reservoir at the top.
Hopefully this helps. GB
Posted on Sep 10, 2009
Tips for a great answer:
Nov 03, 2016 | Dryers
Feb 05, 2013 | Hotpoint Dryers
Nov 07, 2012 | Washing Machines
Apr 04, 2010 | Dryers
Dec 05, 2009 | Hoover Dryers
May 19, 2009 | Dryers
4,726 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: