Question about Televison & Video

1 Answer

I have a JVC RX507V Unit is in standby mode no sound, no power except light for standby mode

Unit will not come on when i press the power button the standby light comes on.

Posted by David Carothers on

Ad

1 Answer

Luis Alonso

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Any luck trying to turn off the stand by mode?

Posted on Apr 06, 2015

Ad

5 Related Answers

tvtek

Duke

  • 1284 Answers

SOURCE: no power when power button is pressed

I would have to say you have a dead power supply. You will want to make sure first that the "MAIN" power switch located on the lower left on the rear of the unit is turned on as well. Without that on there will be NO standby light.

Posted on Apr 18, 2007

Ad

Anonymous

SOURCE: standby mode

It happened to me.. a FAx to Enrique. in California.

Posted on Jul 12, 2007

Anonymous

  • 1 Answer

SOURCE: JVC 42 INCH PLASMA POWER LIGHT BLINKING ONLY NO PICTURE

no kidding? what is the problem so prevelant in this unit? obvious design flaw.

Posted on Jul 26, 2008

Anonymous

  • 1 Answer

SOURCE: Power issue with Olevia LT23

this is bull do...The same thing happens with my TV I Have the Olevia 23" and the power will not turn on.
$700 shot, who cares about the rebate when it works on a short while...

Posted on Nov 24, 2008

Anonymous

  • 1 Answer

SOURCE: lg plasma 50px4d-eb keeps going into standby mode

no solution, yet... our tv is under warranty, and this is the 2nd time we are going to have to have the SAME problem repaired, and they replaced the whole "INSIDE" the first time!!! so, same problem, 2 different panels, must mean somethings going on, you crappy Sony, you! *shaking fist*

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a RCA DVD Home theater system and I plug it in and the blue standby light comes on, but when I push it or other buttons on the unit, it just powers off and then won't turn turn back on at all....


I am having the same problem...i plug it in the standby light xomes on but i press the power button and nothing happens...mine is a rca rtd315wr model

Sep 03, 2011 | RCA RT2360 System

2 Answers

MY MEMOREX DVD PLAYER suddenly WONT TURN ON?


Unplug power cord, wait 30 sec. Plug back in. Worked 4 me

Mar 20, 2011 | Memorex MVD2042 DVD Player

1 Answer

My Sound Space12 powers on but there's no display and no manual or remote functions to operate the discs or the other functions.Can you provide a answer.regards


If the system is connected properly and the main tuner power is on you will see the orange standby light on in the front of the main diamond shaped control unit. If that light is not on, you have not connected the system and power cables properly.

If the standby light is not lit, press the power on/off button in the middle of the rectangular processor/tuner to turn it off and unplug the main power cord from the main tuner/processor from the wall. Next, ensure that all of the power, video and audio cables from the diamond shaped control unit are properly connected to the large tuner/processor. Since you are there, check any other av in/out connections.

Now that you have checked and adjusted the cables between the controller and the tuner, plug the tuner back into the wall and push the power on button. Now check the standby light again on the diamond shaped controller unit.

Once that light is lit, press the silver, horizontal on button in the middle of the diamond shaped display unit, or the Power Standby/On button on your main remote control and you are operational.

Mar 05, 2011 | Nakamichi SoundSpace 12 System

2 Answers

Unit does not turn on or display time


do you mean a power surge, if so the surge may have overloaded the elctronics,=cooked ,so afraid is u/s

Jul 07, 2010 | Fisher SLIM-3010 Shelf System

2 Answers

Stuck on Standby


Do a hard reset. Unplug it from the socket, the DVD and leave disconnected for 4 hours. This may or may not help, but it is a necessary step to restore all internal software codes to their factory settings.


Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Aug 28, 2008 | JVC XV-523 DVD Player

3 Answers

Receiver standby light,no power


WOOHOO!! I fixed this issue... same problem as everyone else has mentioned... to reset the Kenwood VR-606 receiver, unplug the unit. Hold the power button down and while holding the power button plug the unit in.
Say a prayer...
Then press the power button.
My display isn't working, but my speakers are working, and that's really all I care about right now... good luck to others!

Jan 18, 2008 | Kenwood VR-606 Receiver

2 Answers

DVD player stuck in standby mode


Bad caps in the power supply is causing this. C17 (10v,470uf), C17,c14 (10v,1000uf) and C18 (10v,470uf). Replace with same capacitance values but 25 volt rating 85 C. Just fixed mine half hour ago works great.

May 27, 2007 | Onkyo DV-CP500 Multi-disc DVD Player

1 Answer

No power when power button is pressed


I would have to say you have a dead power supply. You will want to make sure first that the "MAIN" power switch located on the lower left on the rear of the unit is turned on as well. Without that on there will be NO standby light.

Apr 17, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...