Resolution change on my lap top screen when I load my webcam

download your drivers from
http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/LOGITECH/Logitech-QuickCam-Express.shtml

Yes no problem.
You need to configure Skype to use this WEBcam.
For details on setting up the WEBcam on Skype, please click on this link :-
http://www.fixya.com/support/r6522226-skype_video_problem

Please find the offficial site of logitech to download the drivers.
click on the link below:

Logitech

The Logitech QuickCam Express is 0.3Mp resolution, which is 640x480 pixels (VGA). Not very good for webcam standards these days. Here is a good primer on webcam specs and features.

Hopefully you have not loaded the quickcam software yet. If you have, hopefully you only loaded the drivers for the cam and not the logitech control panel for the camera. If you loaded the control panel, it loads everytime you start your computer and runs minimized in the bottom status bar. When you start Skype, it activates the camera and so does the logitech control panel. Thus you have two programs trying to control the cam at the same time and you have nothing but problems thying to get it to work. You will need to right click on the logitech control icon and exit the program before starting Skype. After you start Skype got to tools, options and set your camera and mic. settings from the drop down menu. You can then go to Skype test call and see if the settings are correct. Skype allows you to turn on the video or off when you make calls to others. This is so they can't see you, but you can see them during the call unless they have theirs turned off also. Good Luck, RAC

Skype usually recognizes the web cam. If not try reinstalling Skype if your cam works

I could help you but would have to get on Skype and talk you through the setup. Bud

i've got the same problem. please help.

He will have to go back to an older version of the Logitech QuickCam software. I don't know how far he has to go back. I had the same problem and went back to version 9.5 and the problem went away.

You can find older version of Logitech's QuickCam software on their FTP site.

ftp://ftp.logitech.com/pub/techsupport/quickcam/

update drivers:

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

and go into setup in skype and setup the video chat to use your camra. if that doesnt work.. try uninstalling the camera and software and starting over with new updated drivers.. be sure to load the drivers before you plug in the camera.