- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check fuses and wires for Amplifier, if fuse OK Amplifier is probably bad.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
ok if u have a radio with sub controll make sure its on an make sure that you have the gain bassboost turned up an if it has a crossover switch make that its on
The following should help you. Good luck. Please rate.
Radio 12v
orange
+
radio harness
Radio Ground
black/orange
-
radio harness
Radio Ignition
yellow
+
radio harness
Radio Illumination
brown/white
+
radio harness
Factory Amp Turn-on
lt. green
+
radio harness
Power Antenna
gray
+
radio harness
LF Speaker +/-
tan - black
+,-
radio harness
Notes: If equipped, the amplifier is in the passenger side of the trunk.
RF Speaker +/-
blue - red
+,-
radio harness
LR Speaker +/-
white - brown
+,-
radio harness
RR Speaker +/-
orange - green
+,-
radio harness
For the stereo the following will work.
check the amp. fuse, if this is OK with the radio On check the turn on wire at the amplifier must have voltage if not, check if this wire has voltage at the radio if there is voltage, the wire is broken some where.
HOW DO I BRIDGE MY SONY XPLOD XM-2150GSX AMP
Is your radio a stock radio or aftermarket?
×