What does spoken word mean. i nead to know. - SanDisk Sansa m230 MP3 Player

Laptop's are not known for there sound, the smaller the laptop the smaller the speakers are by design. That said, try different Media players with Equalizers, Real Player, VLC, etc. You can find freeware Media Players here: http://www.filehippo.com/ OR a External Speaker, I use the Bose Sound Dock: http://www.bose.com/controller?url=/shop_online/digital_music_systems/sounddock_systems/sounddock/index.jsp

After you get past novice level (Score > 100), instead of spoken instructions, sometimes you get sounds instead of the spoken instructions."Crash" sound means press Bop It"Ratchet" sound means "twist it""slide whistle" descending sound means "pull it"There is another sound for "shout it" if you have this feature active.

Brazil is a melting pot of peoples from several areas around the world, As a result, several languages are commonly spoken in Brazil. Portuguese is the official language of Brazil. Portuguese, Spanish, English, French and Creole are the languages most common spoken in the country, in that order. Joe

nead to know more,is there ice or frost forming on the back wall of the frezzer,nead to know the mod# of the unit.

you nead to check the door switch.nead to know mod# to know witch door switch you have.

you nead to check the door switch,nead to know the mod# to know what type of door switch you have.

first you nead to unplug the dryer,next you nead to remove the vent hose,next you nead to remove the back panal and the power cord cover,on the left side you will see the heater housing,at the bottom you will see the heating element,there are four wires,the two at the bottom are hooked to the element,you nead to pull them off,the other two wires are hooked to the high limit switch,you nead to pull them off,next there are two 1/4"screws,one on each side off the heating element,remove them,now pull out on the bottom of element,with element removed,remove the high limit switch from old element and put it on the new element,take new element and put it back in the heater housing and replace the two 1/4" screws,you will see that the two wires that go to the element are biger than the two going to the high limit switch,put the two wires to the element,now replace the two wires to the high limit switch,replace the back panal and the power cord cover,replace the vent hose,plug power cord in and check element out.

nead to know what bran it is,also nead to know if ther is ice or frost forming on the back wall in freezer.

you will nead someone to help you to know if you have a bad moter.first you nead to open the door,with your right hand you nead to push in on the door switch and hold it in.next you nead to have someone puah in on the start switch,at the sam time ,you nead to take your left hand and turn the inner drum clockwise, if it starts than you have a bad moter.

nead to know more,is the inlet break vacuum connected,nead the mod#.