At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sorry but this forum does not supply manuals direct; it's just made up of ordinary guys and gals, probably at home, with experience of addressing problems ;-0)
You will need to type into your search engine/web browser '(make) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount. During the process you will be asked for the actual model number!
Good luck,
John C.
You can download the needed instruction manual from here: http://www.whirlpool.hu/app.cnt/whr/hu_HU/pageid/pgsrvifuhome001. Select the model number and click to download "LETöLTéS".
I took out the filter in my whirlpool AWZ410 and cannot get it back in now. It just does not lock home. If I use the machine it floods out through the filter.Any suggestions please?
Am taking out my element so can tell you. First 2 thick greys: easiest: a short lead with white conector at each end: one end joins element, on right hand spade, and other end to left (at about 9.30/10) spade on thermostat. the other grey goes to lowest spade on thermostat (about 6.30/7, if it were a clock) Thinner White leads: impossible to say, as same length, indistinquisable: you will just have to experiment with the 2 spades left; as its both on a thermostat I don't feel there's any risk of breaking it/any part
Make sure the half load / drying button is pushed in also and the drying time set. Do you know whether the temperature dial controls the washing or drying cycle. Have shrunk too many jumpers. Thanx
Dryer problems
×