When I plug the mediaplayer into a PC via USB - it works fine on that PC. The next time I plug it in on a PC that it has once been used on then the PC wont find it. In the device manager, the USB mass storage device cannot start due to error 10. Any ideas? Thanks!
SOURCE: Freecom 500gb storage drive
If the fuse has blown then I am almost certain the Drive would be Kaput! sorry..
It may be possible to recover data from ya kaput drive, very difficult and expensive but do-able..
Ya probably should take it to a reputable shop let em have a squiz..
Posted on Jul 28, 2008
SOURCE: freecom 160gb harddrive not been reconized with usb
you can look at jaycar, **** or rs if the sell the right usb plug and solder it back in.
Posted on Jun 09, 2009
SOURCE: freecom external hard drive classic 2.5
Have a look here>
http://www.freecom.com/ecDrivers.asp
I can't see any Mac drivers for the drive...
I found this page>
http://freecom-usb-osx.sourceforge.net/
You might be able to get some help here...
Posted on Jul 01, 2009
SOURCE: USB not recognized
if the usb ur using is 1.0 - it can read it - get a 2.0 external unit and you're good to go.
Posted on May 02, 2010
165 views
Usually answered in minutes!
×