Question about RCA BD20TF10 20 in. TV/DVD Combo

1 Answer

Rca tv/dvd model bd20tf10

Hi, We're having intermittent trouble with the dvd tray on the unit. Almost every time a dvd is put in the tray it immediately spits it out and then the tray goes right back inside and sometimes continues endlessly if not stopped. At times we're able to press play and it will begin to play. This seems to be only by luck, but we'd like some reliability. Anyone have any suggestions? Thank you, loonette96

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

The problem of your unit is with in the system IC. located at the mother board. replaced mother board. intermittent trouble is cause by leaky capacitors take note of this.

Posted on Mar 01, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eject button is stuck


Get in touch with the manufacturer's product support and ask them.

May 07, 2015 | Televison & Video

1 Answer

Load disc, unit tries to load & play, unit shuts off. Turn power on to set time,etc,machine shuts off.


Laser pickup unit fault. The unit alongwith its flat connecting cable should be replaced. Contact any service technician. Electro help

Feb 23, 2015 | Samsung DVD-V2500 DVD Player

2 Answers

Go Video DV 2150 - DVD door won't open at all. You can hear a mechanism working behind the closed door, but nothing happens and the door remains shut. Any advice??


There is a small belt under the loading tray which would have gone slack ( loose ) and the sound you hear is it slipping on the motor pulley. If you are confident you can remove the mechanism and turn it upside down and access this belt. Dismantle only if you can get the spare belt or your efforts will be in vain.

Sep 13, 2011 | GoVideo Go Video DVD/VCR Combo

1 Answer

Insert DVD, closes, but opens immediately and the screen just says hello. The unit will not shut off unless I unplug it.


If I remember correctly, this unit has a little rubber belt that drives the DVD tray. When it ages, the rubber hardens and loses traction. Thus, the tray does not close properly, the internal sensor recieves no 'closed' message within a specific time, and the tray opens.

Jun 11, 2011 | Zenith XBR716

1 Answer

I have an RCA DVD/VHS combo with TVG. The DVD


This is a work-around rather than a solution. We put an audio CD in the tray and after closing the tray the unit begins to play the music. After waiting a few seconds we open the tray and quickly substitute a DVD and it loads OK. We had also tried cleaning the player to no avail. The CD approach is a pain but it does allow us to play DVDs. Jim

Jan 15, 2010 | RCA Televison & Video

3 Answers

Open/close tray disc stuck bose Lifestyle 48


Problem:
I also have a bose Lifestyle 48, and the same problem has happen to me where the DVD player would not open,
Solution:
Unplug the unit, Wait a few seconds, after plugging the power back in, immediately hit eject so that the player does not have time to spin up and try to read the disc again

Feb 17, 2009 | Bose Lifestyle 48 System

1 Answer

Washing Tabs


Hi Zanussi do not recommend tablets for this machine as it is a jet system and uses far less water than conventional machines. it recommends liquids or loose powder to be used in the tray I know as I sold these for 10 years.

May 04, 2008 | Zanussi ZWF1440 Front Load Washer

2 Answers

Locked DVD Tray


I'm pretty sure the force disk eject is the same across all Panasonic models - however I couldn't find anything specific for your model number. Still worth a shot, though.

With the unit in standby, press and hold the 'Stop' and 'Ch up' buttons together. It should power up and force the tray open. If this doesn't work, try changing up your timing by pressing and holding 'Stop' first, then a half-second later, press and hold 'Ch up' and keep them both held together. You can also try the opposite.

If none of these work, it will have to be taken apart to get the disc out. If you aren't comfortable trying, it will have to go to service.

Mar 09, 2008 | Panasonic DMR-HS2 DVD Recorder

1 Answer

DVD Tray won't open.


Replace the DVD unit part#265278. It shows as NLA but do some searching.

Feb 01, 2007 | RCA 24F501TDV 24" TV

Not finding what you are looking for?
RCA BD20TF10 20 in. TV/DVD Combo Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...