No driver for windows vista for ge minicam pro 98067 rev 2

1st You download Webcam Driver.
Minicam pro rev 2 98067
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

http://www.jascoproducts.com/support/vista-certified-products.asp

Hi.. Here is the link to download the driver for GE miniCam Pro 98067. Compatible with Windows 95, 98, 2000, and XP


To Download Instruction PDF file, Click Here

Hello,

Please click the link below to download your driver:

Download GE Minicam Pro 98067 Driver

Please select the model of your minicam then click zip to download your driver.

Thanks

You will find the driver you need on the page linked below:

http://jascoproducts.com/support/software-downloads.asp#pccams

www.ge.com

Click on Products & services, then consumer electronics, software and driver downloads. scroll down to GE minicam and download driver

http://www.jascoproducts.com/support/software-downloads.asp

I would say it's safe to use the rev 1 version. It would of made a differance if it were a differant model number, but a revision is just an updated version of the previous driver release. Try installing it, can't do any harm in trying.

check this web site http://www.jascoproducts.com/support/software-downloads.asp for the driver

hope this'll help you.

try running the driver installer in xp sp2 compatibility mode, or as an administrator. get the drivers off the manufacturer.

On this page read the two technical FAQs at the bottom of the page -- the first is an error that may occur after install and may need fixed. The second concerns me more the 98063 camera had Rev(ision)s and the 98067 camera has Ver(sion)s. You have a cross a 98067 Cam with a Rev(ision) -- please confirm what you wrote is correct.

http://www.jascoproducts.com/products/pc/viewPrd.asp?idcategory=0&idproduct=30


you will need Adobe Reader (free) to read the instructions
if you do not have it click the Get Adobe Reader button on the following link
http://www.adobe.com

If this seem appropriate there are vista drivers and instructions are on the following link near the bottom for the various cameras
http://www.jascoproducts.com/support/vista-certified-products.asp