Question about RCA RCR450 Remote Control

5 Answers

Programming RCA (RCR450)

What buttons do you push to get it to search through the codes to set your tv

Posted by Blake Dotson on

  • 10 more comments 
  • Anonymous Dec 03, 2007

    all i need is the code(s) for my RCA universal remote to my magnavox tv

  • btscribble Dec 08, 2007

    my batteries fell out of my RCA remote. I have a panasonic tv and i need the codes--plez
    robyn

  • Anonymous Dec 23, 2007

    can't program remote

  • mommys123 Dec 31, 2007

    rca4258 lost how to program book how do i get started again to program code

  • travco Jan 06, 2008

    I have lost my paperwork that came with my remote and I do not know what buttons to hold down to search for codes

  • Anonymous Aug 14, 2008

    intsructions

  • ml00 Aug 27, 2008





    The controller was programmed for my daughter's Advent TV after purchase and the manual not properly put away. Somehow the controller is now not programmed. I fail to recall the programming procedures and I do not know the code used for her TV. Viewing the internet to resolve this is the only resolution attempted in the few minutes since I have discovered the problem.

  • Anonymous Sep 27, 2008

    need the codes for progarmming

  • tshel90 Nov 26, 2008

    i lost the paperwork to my remote, and dont know what buttons to push to get it to go through the channels and then set it

  • pntrldy Dec 20, 2008

    how to program code into remote

  • jforizzel Feb 02, 2009

    I need the code list for my rca rcr450 universal remote.

  • Anonymous Mar 22, 2009

    My remote not working at all even after trying to do tv coding

×

Ad

5 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Governor:

    An expert whose answer got voted for 20 times.
    Corporal:

    An expert that has over 10 points.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Press and hold TV button. Hold the ON/OFF (both) for 3 seconds until light blinks and stays on. press the on/off button to change codes and when tv turns off, press stop.

Posted on Apr 01, 2007

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Http://remotefinder.rca.com/default.aspx?site=rca

here is the site, the top guy wants to make $$$.

Posted on Mar 01, 2009

Ad

Anonymous

Found this page for pdf download of manual.
http://www.retrevo.com/support/RCA-RCR450-Universal-Remotes-manual/id/402ci574/t/2/

you do not have to enter your email, just the 'security' code to get the download to start.

Posted on Aug 24, 2008

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Would help to note on the physical remote that there IS NO actual CODE SEARCH BUTTON, rather a TIME oriented search PROCEDURE to activate search mode....went crazy looking for the phanthom, elusive, non-existing SEARCH BUTTON.

Posted on May 22, 2007

Anonymous

Http://support.rca.com/doc/Device_Documents/manuals/RCR450_manual.pdf?deviceDocId=216&docid=440&navtypeid=6&pagetypeid=7&prevPageIndex=16&selectedmodel=RCR450&selectedFamily=television&nvty=m

Posted on Feb 25, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Programming for TV
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Go to the above website, find the RCR450 download link, enter your email address....

Jul 04, 2009 | RCA RCR450 Remote Control

1 Answer

I need a code for a universal remote
Here is the link I just found the manual on for this remote control, which I needed the codes for myself: http://safemanuals.com/brand-user-guide-instructions-owner-manual/RCA go there type in the remote model RCR450 enter, click on the link that comes up and download the Manual in PDF form.

OR:

1: Turn on the device you want to program ex: the TV

2:hold the button for the device you need to program in ex:TV
while holding down TV button hold down ON/OFF at the same time for 3 secs and the light should turn on and stay on.

3:click the ON/OFF button until the TV finally turns off may take many times but as long as the light stays on when your not pushing a button you still have codes to go through.

4:press the stop button and the device is programmed into the remote.

Mar 17, 2009 | RCA RCR450 Remote Control

2 Answers

Programing codes
Here is the link I just found the manual on for this remote control, which I needed the codes for myself: http://safemanuals.com/brand-user-guide-instructions-owner-manual/RCA go there type in the remote model RCR450 enter, click on the link that comes up and download the Manual in PDF form.

The codes for Sanyo are 1004, 1048, 1049, 1073, 1080, 1162, 1169, 1180 depending on which model you have.

OR:

1: Turn on the device you want to program ex: the TV

2:hold the button for the device you need to program in ex:TV
while holding down TV button hold down ON/OFF at the same time for 3 secs and the light should turn on and stay on.

3:click the ON/OFF button until the TV finally turns off may take many times but as long as the light stays on when your not pushing a button you still have codes to go through.

4:press the stop button and the device is programmed into the remote.

Mar 11, 2009 | RCA RCR450 Remote Control

1 Answer

What button do I push to set TV up for gaming?
Have you tried turning on the Wii and then pushing the TV/Video button until the screen appears?

Jan 31, 2009 | RCA RCR450 Remote Control

1 Answer

My rca remote doesn't have a code search button
See, in the manual, it says that you must push "TV" and hold while you enter your TV's specific code. You might need to try a few different codes on the manual however

Jan 12, 2009 | RCA RCR450 Remote Control

3 Answers

Need RCR450 Code for Sylvania LC370SS9
Here's the manual =>

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

Sylvania TV codes are 1004, 1006, 1008, 1019, 1062, 1068, 1069, 1075, 1076, 1088, 1130, 1132, 1134, 1183, 1189, 1251 listed in back of the manual.

Dec 28, 2008 | RCA RCR450 Remote Control

1 Answer

I have a rcr450 remote that I want to program to my vizio tv but I can't find the codes for my tv. This remote dosn't have a code search button or I can't see one.
Here's the manual to RCR450.

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

Try LG codes or Goldstar codes.

Dec 27, 2008 | RCA RCR450 Remote Control

1 Answer

Programming a remote
Here's the RCR450 Manual =>

http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr450-manual.zip&area=other

The codes for Toshiba TV are Toshiba 1000, 1048, 1072, 1105, 1109, 1118, 1160, 1190, 1241 and are listed in back of the manual.

Nov 14, 2008 | RCA RCR450 Remote Control

1 Answer

Remote set up
The manual for this remote can be downloaded for free in PDF format from:
http://safemanuals.com/user-guide-instructions-owner-manual/RCA/RCR450-_E

I actually found it while searching for the RCR451, but it works on RCR450.

Important !!

1) Press "device" button, release
2) Press "device" and "on/off" at same time until indicator light stays on
3) Press "on/off" until device EITHER turns off or goes to (device) menu
4) Press "Stop" key to store the code

I used this control and method to program a Fisher VCR, a Zenith DVD/CD player, and a Quasar 25" TV.

Good luck !!

Oct 09, 2008 | RCA RCR450 Remote Control

1 Answer

Help
There is NO "code search" button on this unit.

Here is a copy of my previous post regarding the programming of this remote:

The manual for this remote can be downloaded for free in PDF format from:
http://safemanuals.com/user-guide-instructions-owner-manual/RCA/RCR450-_E

I actually found it while searching for the RCR451, but it works on RCR450.

Important !!

1) Press "device" button, release
2) Press "device" and "on/off" at same time until indicator light stays on
3) Press "on/off" until device EITHER turns off or goes to (device) menu
4) Press "Stop" key to store the code

I used this control and method to program a Fisher VCR, a Zenith DVD/CD player, and a Quasar 25" TV.

Good luck !!

Jul 15, 2008 | RCA RCR450 Remote Control

Not finding what you are looking for?

View Most Popular

RCR450 Remote Control

  • Televison & Video

Related Question

Programming for TV

  • RCA RCR450 Remote Control

Open Questions:

0 Answers

How do I go about putting the codes in and making it work?

Feb 20, 2016 | RCA RCR450 Remote Control

0 Answers

tengo un control GE necesito el codigo para una caja convertidora kcpi

Jan 27, 2014 | RCA RCR450 Remote Control

0 Answers

code for fukuda dvd midi player

Jan 12, 2014 | RCA RCR450 Remote Control

0 Answers

battery cover won't come off

Oct 13, 2013 | RCA RCR450 Remote Control

See all RCA RCR450 Remote Control Questions

Related Topics

RCA RCR450 Remote Control Logo

Related Topics:

6,498 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

RCA RCU600M Remote Control

RCA 3-Device Universal Remote...

RCA F27450 27" TV

RCA Universal Remote Control

RCA 27F534T TV

Check Out the Latest HD Televisions Report
Check Out the Latest HD Televisions Report

View all Fixya Reports

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76504 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6234 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...