What year is the kemp chipper model 604?

Type in exactly what you did right here. Except, and the model number then manual

there's are website that I know all heavy equipment repair issues servicing, loading, wiring, engine problems everything is covered here its a must try for those who aren't fully equipped with tools or knowledge

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. l et me know if u need help
thanks

Get the model and type number off the engine and you can go to a website like partstree.com or others and with the brand and the model and type number you can get diagrams of the engine.

I hope this is helpful for you.

See if this link works for you:

http://www.mytractorforum.com/images/reference/Kemp_Chipper_Shredder_Manual.pdf

It is only an 8 page manual.

The Kemp company as far as I know is no longer in business so finding this manual was a diamond in the rough.

Thanks for choosing FixYa,
Kelly

The B & S Code is the date of Mfg. This engine was built in 1994 (first two digits rep. the year), Sept.( the next two digits rep. the month) and the second day of that month. Your engine was built on Sept.2,1994. Your chipper may be one year newer as the engine had to be installed after the date of mfg. Your welcome
From North Carolina

Don't know where you can get a manual, you never stated the model number, but you could contact the factory and talk with an engineer about whatever problems your having. (There are also parts still available for these older fellas).

http://mackissic.com/Tech%20Support.html

I would check with an MTD dealer. I look online and found a site for the chipper blades and they wanted $40.00 USD for each. It may be worth your time to take the other ones out and get them sharpened.
Good Day.

Let me know the size of your Kemp shredder Teeth.I might be able to help you. [email protected]

green acres went out of buisness