I'm trying to figure out how to set up the voice mail on the phone here in my office but can't figure it out. if you could help me out let me know.
SOURCE: Delete old voice mail - program new voice mail
You can usually access the system voice mail setup from any extension.
Press Speaker
Dial ext 200.
When asked for security code, dial *,2,# (dial it twice if there is no code).
When main greeting begins, dial 632.
Using the soft keys under the display, press MORE, then MGR, then CHBX or, follow voice prompts if non-display phone.
Follow voice prompts. Remember, 1=Yes, 2=No.
SOURCE: Changing message on Comdial Impact Telephone
Sounds like you are trying to change a voice mail recording. Your Comdial phone can be used on several different Comdial phone systems and with several different voice mail systems that all program and set up differently. Do you have any manuals or instructions for your voice mail system? If not, you will need to find out which voice mail you have and try to locate manuals.
To change main greetings, etc.. you would need administrative rights to the voice mail. There will probably be a password, hopefully you know it or it's still at default.
SOURCE: comdial dx-80
The LCD display has completely disppeared on my Comdial DX-80 - the main programmable phone for the group. While the other phones in our systme are fine. I can't see anything on the LCD. Anyone know why? How to get it back? Otherwise, the phone seems to work fine.
SOURCE: Comdial Impact 24/48/72 phone
You can try the below steps in order to turn off Do Not Disturb.
For GE 6.0:
There is a button on the base lower right corner (NOT the phone), you need to press it once again to turn off Do Not Disturb
For GE 5.8 GHz:
1. Pick up the phone handset and dial *98.
2. Press 2 to disable Do Not Disturb.
3. Once you hear the confirmation that Do Not Disturb has been disabled, you may hang up the phone handset.
SOURCE: I don't know the voicemail password; I am trying to reset it to the default
you will need to log in from a main phone or phone with LCD screen and go to the set you need to set to default in the menu...this maybe only be done through your vendor unless you know the system password to get into the configuration mode.
918 views
Usually answered in minutes!
×