I have a 27" magnavox tv and the original remote is broken. Recently hit child lock on mistake through the tv buttons. Now cannot turn TV on. Tried to buy a universal remote but unable to get TV to respond. I have tried it on other TV's in the house with the power off and had no problems. Also opened up the tv to see if there was a reset switch inside but again no such luck. Is there any way to remove child lock so I'm able to use my tv again? Not much help out there for this problem. Any suggestions would be helpful!
I need the answer for this problem i have a 27" tv and the original remote is lost. recently hit child lock on mistake through tv buttons. now cant turn tv on. tried a universal remote but unable to get tv to respond
On those particular Magnavox TV's you have to use the original type of remote to power it back on then un-lock the parental lock. It is a bummer that nothing else will work. Here is a link to purchase a replacement remote.. http://www.electronicadventure.us/Merchant2/merchant.mv?screen=prod
Just go to http://www.remotes.com/
×
Hi just thought id let yo all no i had the same problem with a waltham but all i had to do was use a phillips remote that was lying around it had all the right buttons and was for a normal tv 32" not hd or flat =0) im not saying this will help every one but its possible that other remotes might work too!
p.s. its worth a try
**** use all I WANT SOLUTIONS NOT PROBLEMS U CANT FIX PROBLEMS WITH OTHER PEOPLES PROBLEMS USE ALL ****!!!!!
I had (past tense, unlocked it this morning) the same problem for months. I have a cheap universal remote $5, Plustron URC11E-8A. I used the arrowed keys, not the vol or ch keys, at the bottom of my remote. Push ok when you've finished your adjustments. Good luck!
If you have a universal remote use that to turn the T.V.back on, I have a direct T.V. universal remote. As long as your universal remote is setup to turn the T.V. off and on you should be able to turn it back on with the remote. The child lock just locks out the buttons on the T.V. but not on the remote.
I don't know if all universal remotes will work, some are just ****, but give it a shot.
I had (past tense, unlocked it this morning) the same problem for months. I have a cheap universal remote $5, Plustron URC11E-8A. I used the arrowed keys, not the vol or ch keys, at the bottom of my remote. Push ok when you've finished your adjustments. Good luck!
Hiiiiiiiiiiiiiiiiii
SOURCE: 27" MAGNAVOX W/ CHILD LOCK ON- NO REMOTE!
Hi,
Did you try disconnecting the TV overnight to reset it?
4,997 views
Usually answered in minutes!
Have exact same problem! Please help me
Accidently put child lock on and now i am unable to get it off and i dont have controller and the universal remote does not work. Please help me.
TV WAS NOT OUT WHEN IT CAME BACE ON THERE WAS NO SOUND
Hi, I accidentally turned on the child lock on my Magnavox 27" T.V. and when I tried to turn it off I turn the whole T.V. off to reset it but now it wont turn back on. I really would like to know how to turn it back off. Thanks.
I had (past tense) the same problem.(just unlocked this morn) I have a cheap universal remote (plustron URC11E-8A, $5). Try the the arrowed keys at the bottom of the remote, which look similar to the ch-/+, vol-/+ and the ok key in the centre. The menu came up and I was able to remove the childlock and adjust whatever I needed to. This hopefully can work for most universal remotes with the above named keys. Good luck
I have the identical problem where I tried to set the timer and hit child lock in error. Now tv does not power on. Is there any resolution.
my tv get child lock accidentaly and it get frozen
Accidently turned on Child Lock. I have a Magnavox Remote Control. I have no idea what the combination turn on symbols (numbers) are. Can you help?
i push the botten on the tv so the menu can come up but miss and push another butten on the tv . now i can not get it off can you please help me.
I DID THE EXACT SAME THING!!!!HHAHAAH
I did the exact same thing ...help!!!
please u guys found any help? i have the same issue i hope u help me if u know a solution
×