The Y= screen has new choices towards the left

Get what use you can, there is not a way to "fix" that--the front screen unit is called a display panel and even if it was available the part alone would cost much more than the whole set did when new, time to go shopping for a new set.

Sorry, damage to the screen unit is always fatal.

check & see if this will work for you

Login to your account
After you've logged in
you'll see your email folders on the left side
What's new and inbox tabs in the middle
upper right side of the page look at the three links
Click OPTIONS and when the drop down menu appears
choose MAIL CLASSIC
A dialog box will pop up with two choices -- SWITCH TO YAHOO MAIL CLASSIC
If you're sure you want to switch click the first option

your computer's speed & your internet connection the switch may take several seconds. When it's done you'll be back with Yahoo Mail Classic

here's a way to switch back to classic yahoo, if you'd like to try it, hopefully it will work for you
Login to your account
After you've logged in
you'll see your email folders on the left side
What's new and inbox tabs in the middle
upper right side of the page look at the three links
Click OPTIONS and when the drop down menu appears
choose MAIL CLASSIC
A dialog box will pop up with two choices -- SWITCH TO YAHOO MAIL CLASSIC
If you're sure you want to switch click the first option

your computer's speed & your internet connection the switch may take several seconds. When it's done you'll be back with Yahoo Mail Classic

see if this will work for you

Login to your account
After you've logged in
you'll see your email folders on the left side
What's new and inbox tabs in the middle
upper right side of the page look at the three links
Click OPTIONS and when the drop down menu appears
choose MAIL CLASSIC
A dialog box will pop up with two choices -- SWITCH TO YAHOO MAIL CLASSIC
If you're sure you want to switch click the first option

your computer's speed & your internet connection the switch may take several seconds. When it's done you'll be back with Yahoo Mail Classic

try this & see if it works for you

Login to your account
After you've logged in
you'll see your email folders on the left side
What's new and inbox tabs in the middle
upper right side of the page look at the three links
Click OPTIONS and when the drop down menu appears
choose MAIL CLASSIC
A dialog box will pop up with two choices -- SWITCH TO YAHOO MAIL CLASSIC
If you're sure you want to switch click the first option

your computer's speed & your internet connection the switch may take several seconds. When it's done you'll be back with Yahoo Mail Classic

Hi,
I'm sorry but nothing can be done to fix the problem because it is defect of lcd panel (screen) that will be replaced but it would cost you approx new tv price so new tv is better choice instead of lcd panel replacement in this tv.
Again, I feel sorry for the bad news.

The tv LCD screen panel itself it is dead,by force.Sorry,no not repairable.Only way to repair this tv,it is to replaced the whole LCD screen panel itself,not practical or possible because the LCD screen panel it is mission impossible to buy as a refurbish items,only can buy it from tvs manifacture itself only,but it 90% important to the tv and it functions and it is very limited production items,so they'll sell it to u,but the cost it is the same as a new tv.Buy a brand new tv it pretty cheap these day at Walmart stores.Tries buy another tv same make and model as ur old tv.Save the dead broken LCD screen panel old tv somewhere for later years,as refurbishes electronic PCB boards for ur new tv later uses.

Hello,

To reset the router without a CD :

Step 1: you will have to press and hold the small reset hole at the back of the router with a tooth pick or a needle for 15 seconds..
Step 2: Make sure you have a computer connected Wired to the router through an ethernet cable and Open Internet Explorer and delete everything from the address bar and type "http://192.168.2.1" and hit enter.
Step 3: Check if the internet status says connected/connection on the top right hand side of the page.If its connected then proceed to the next step,if not :
For A Cable Connection: Toward the left side click on "Clone mac add" and leave the "Password field blank" and click on submit and then click on clone,make sure the numbers changed and click on apply changes. After doing this disconnect the power from both modem and router for 30 seconds and power back on.
For DSL Connection : You can try the above step,if it doesnt work towards the left side click on "connection type" and select PPPoE and type in your username( E-mail add provided by your internet service provider) and password and click on apply changes and disconnect the power for both modem and router for 30 seconds and power them back on.
For a Static Connection: Towards the left side click on "connection type" and select "Static" and type in your static connection details.
Step 4: You can change the name of the network under "Channel and SSID" towards the left side of the page. The one which says "SSID: Belkin" thats the network name.You can change it to anythin of your choice.
Step 5: You can enable security password by clicking on "Security" towards the left side of the page and select either WEP or WPA. WEP requires any 10 digit Hexadecimal password(0-9 and A-F) and WPA can be anything of your choice.

Now your Router is up and ready and secured. Connect your wireless laptops to the network and you will be able to go online wireless..!

Hope this helps. Please feel free to contact us for further assistance and information.

you are gonna have to get a new phone you have somehow burnt out the back light probably left it on all the time. Sorry hun if still under warranty might get one for free

your having convergence circuit problems, you`ll need to change the convergence IC`s and any burnt resistors in the convergence circuit, if you have questions e-mail me back, good luck, BMW Rider