I would like to know if anyone can suggest a place where I can get parts for this monitor besides Ebay,as they don't have any for this right now.Does Compaq sell parts for these?I'm looking for the little black plastic shield with two holes in it that covers the board under the two stand screws.It's about an inch wide,and five inches long.I know it is not a real big deal,but I broke it taking it apart, and I figured if it wasn't too much,I would just get another one.I also need some Elite 16V 1000uF 105c capacitors.These are the large tall black ones.I looked on Radio Shack,but they don't carry these.Any help is greatly appreciated!Thank You very much! Tyler
Concerning the black plastic piece, gluing it may be your best bet since specialty parts like that are not usually available for these monitors. I would NOT recommend that you try to find Elite brand capacitors. They seem to be the cause of the failure, after all! I always replace ALL of the non-polarized electrolytic capacitors in these units with new 105-degree, good quality replacements. At the very very least, you should replace any that are bulging or leaking. While any good brand is fine, I get them from Tritronics. Order them by value and voltage (make sure the voltage you choose is at or a bit higher than the old cap). Visit http://www.wehaveparts.com then click on "Click Here to Shop Our Parts & Accessories Catalog" then on the next page scroll down to "Capacitors" and click on "Standard Electrolytic Caps".
Posted on Feb 06, 2007
42 views
Usually answered in minutes!
×