Question about Canon PIXMA iP4200 InkJet Photo Printer
Cannot get printer to work, revieve the following message "Some intanks are not installed in place. Confirm that the following ink tanks are installed in the appropriate positions"
Wilba, I found some info on how to make sure the cartiges are seated properly but it wouldn't paste over...so here's the site: http://www.usa.canon.com/consumer/controller?act=SupportDetailAct&fcategoryid=257&modelid=11641 Good Luck, Tim p.s. They make their money from the inks and toners...you bought from the enemy and the machine cursed you.. best of luck
Posted on Feb 07, 2007
Tips for a great answer:
1. First of all Confirm that the printer is powered on.
2. Open the card slot cover and then the front cover. The cartridge holder moves to the replacement position.
3. Remove the cartridges.
Note: Handle the cartridges carefully to avoid staining clothes and surrounding work area.
4. Insert the cartridge into the cartridge holder.
Note: Push up the cartridge until it clicks into place.
6. Close the front cover. Wait until the preparatory operation is complete; it takes about one to two minutes.
Now check the printer again. If you still get this error message then it means the Cartridge you installed is not exactly proper, or if you think that u got this cartridge from the reliable source and it is proper and exactly fine cartridge then the problem is in the Print Head. You need to check it again.
I hope you have a clear picture in your mind.
Don't hesitate to let me know if you have some confusion.
Sir, Your Rating for this solution as Maximum Stars and words of appreciation will be esteemed.
Thank you for taking my service.
Concerned: Muhammad Uzair
Usually answered in minutes!