WHERE IS MY PERCENTAGE FUNCTION

Ad

There is no percent function. To enter 20, simply press "." then "2".

Posted on Jun 22, 2012

Ad

SOURCE: TI-84 Plus Calculator Factoring Program

Hi,

There 4 or 5 programs for the TI83/4Plus family of calculators available at ticlac.org. Scroll down the page to find them. Download them and transfert to your calculator using TIConnectivity software.

Hope it helps.

Thank you for using fixYa and for rating the solution.

Posted on Dec 03, 2009

Ad

SOURCE: Change TI 84 OS to TI 89 OS??

And why, pray tell, would you do such a thing? You will ruin your Ti84 Plus Silver Edition and will not have a working TI89. Besides, TI connect will refuse to transfer it.

If you like the capabilities of the TI89 Titanium, buy a cheap or used one on e-bay or amazon.com and spare your TI84PLus SE.

Posted on Feb 14, 2010

SOURCE: Can you Factor on a TI-84? IF not, does the TI-89?

Well, to answer part of your question, yes... the TI-89 does factor like this. it is inputted like this:

factor(6*x^2+11*x+4,x)

Check the catalog in the TI-84 (which is 2nd-zero) and look under F for factor()

Posted on Jan 19, 2009

SOURCE: TI 84 won't graph more than one function

If you have used or just run the Transfrm Application, you will no longer be able to draw more than one graph.

To restore the native OS graphing capabilities Uninstall the Transfrm Application. Here is how to do it.

- Press the [APPS] key.
- Scroll Up to reach the bottom of the list faster.
- Point to Transfrm and press [ENTER].
- Select [1:Uninstall]

Posted on Apr 17, 2010

SOURCE: how do I use the intersect function on the TI-84

- You draw two or more graphs.
- After the graphs are displayed, press [2nd][TRACE] to access the (CALC)ulate menu.
- Select [5:Interesct]
- You will be prompted for a first curve: the equation of the curve will be displayed at the top left corner of the screen. If it is one the intersecting curves, press [ENTER]
- You will be prompted for the second curve. (You can move from one curve to another by pressing the UpArrow or DownArrow).
- After two curves are selected, you will be prompted for a guess for the X-value of an intersection point: you can use the keypad to enter a guess or use the left or right arrow to move the cursor towards a point of your choosing (if there are more than one point).
- After a short while the calculator gives you a solution.
- If it fails, you must make a better guess.

Posted on Apr 19, 2010

I encountered this same problem with the TI-84. Turns out you have to put your P (Percentage) as out of one hundred. For example. With my problem I had;

Trails: 13

P: 53/100

X Value: L1 (List 1)

And then it posted my probabilities to the L2 list. For some reason if you just put 53, or whatever your percentage of success in, it won't calculate.

Trails: 13

P: 53/100

X Value: L1 (List 1)

And then it posted my probabilities to the L2 list. For some reason if you just put 53, or whatever your percentage of success in, it won't calculate.

Jun 19, 2012 | Texas Instruments TI-84 Plus Calculator

14/20=.7 =70/100=70%

Sep 12, 2011 | Texas Instruments TI-84 Plus Calculator

If the table has been created by entering a function in the Y= editor, then you can generate the table by just inserting the function again and pressing Table or Graph. If it is some (statistical) table you entered manually and where you chose the x and the corresponding y, then you will have to retype it again. Sorry

Sep 12, 2011 | Texas Instruments TI-84 Plus Calculator

No, there isn't. You can always convert a decimal value to a percentage by multiplying by 100.

Likewise, there is no permil key or ppm (parts per million) key.

Likewise, there is no permil key or ppm (parts per million) key.

Aug 05, 2011 | Texas Instruments TI-84 Plus Calculator

Use the square brackets ("[" and "]"). They're the shifted functions of the multiply and subtract keys. For Y(sub 1) enter it as "Y[1]".

May 15, 2011 | Texas Instruments TI-84 Plus Calculator

To graph a f o g problem input the g function for y1. Then for y2 input the f function, anywhere there is an x (or whatever your variable is) put y1 instead.

Mar 08, 2011 | Texas Instruments TI-84 Plus Silver...

Press 2nd and Distr and find the InvNorm function. Enter InvNorm(2.13).

If you wanted to find the percentage that fall above, you would enter

1-InvNorm(2.13)

If you wanted to find the percentage that fall above, you would enter

1-InvNorm(2.13)

Dec 07, 2010 | Texas Instruments TI-84 Plus Calculator

Hi,

You cannot use the ± in the definition of a function. If you need to consider two alternatives, you have draw each function separately, one function as Y1 and the other as Y2. I just checked the catalog of commands, and there is no ±.

Hope it helps.

Thanks for using FixYa

You cannot use the ± in the definition of a function. If you need to consider two alternatives, you have draw each function separately, one function as Y1 and the other as Y2. I just checked the catalog of commands, and there is no ±.

Hope it helps.

Thanks for using FixYa

Nov 19, 2009 | Texas Instruments TI-84 Plus Calculator

Ask here for the TI-84 manual, they will get it for you.

Jun 30, 2009 | Texas Instruments TI-84 Plus Calculator

490 people viewed this question

Usually answered in minutes!

×