We have a Panafax UF-890 in our office. Many times a week after the machine has been idle for a while the display will show File System Setup. When a call comes in the machine does not pick up. We have to turn off the fax to allow it to reset. What could be the problem? It isn't sleep mode because when that comes on the machine wakes up fine.
One - there might be a memory card in you machine causing problems. if there is remove it when the power is off.
two- if you dont have memory you can try a shipment set. and if that doesnt work you main board is blown
any questions feel free to ask
91 views
Usually answered in minutes!
The only memory card we have is the flash memory. There is nothing in the other memory card slot. I am not sure what you mean by 'shipment set'. Hopefully the main board isn't blown.
×