Question about SVA-USA HD4208TIIIBU 42 in. HD-Ready Plasma Television

1 Answer


Power cuts out in 10 to 15 minutes. Looks like something overheating in power supply. After 5 minutes can switch on again using power switch and remote. Do anyone know of a similar fault with other Plasma Panel Tv's power supply. IE: What part would be causing the overheating problem? I am a professional Tv repairer. Thanks for your time....

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 149 Answers

SVA is a manufacturer based out of China. Their headquarters is based in LA California. They specify in affordable plasmas and LCD's which are typically a generation or so behind other LCD manufacturers or plasma manufacturers. I have heard of this issue both in the power cord and internal parts of the TV's. Is it still under warranty? Otherwise, you can purchase another power cord. Contact the manfuacturer for those small parts.

Posted on Sep 13, 2007


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is a part number of a power supply of sva hd4208t vi-pdp

SVA HD4208T POWER SUPPLY BOARD PDP-PS-421S(V1.5) / LJ44-00025A shows in stock for $42.99

Apr 23, 2014 | SVA-USA HD4208 42 in. HD-Ready Plasma...

1 Answer

My tv cuts off after 5 minutes

Could be the power supply overheating and going into protection mode. If it is under warranty use it. If not then you could take it apart (this will void warranty) and check for swolen or leaking capacitors on the power supply.

Jan 28, 2013 | Vizio P50HDTV20A 50 in. Plasma HDTV

1 Answer

I can't get the tv to turn on. The power source is working fine and the tv was working in the store when I purchased it. Any suggestions??

Only to contact the store and get it either replaced or fixed. Fiddling with it or attempting to open and repair it voids any warranty

Please rate my help++++Thanks for using Fixya

May 29, 2010 | SVA-USA HD4208 42 in. HD-Ready Plasma...

1 Answer


Here is the cheapest place to find the board.

You Need a new Power Supply, part # LJ44-00025A
buy it here for $139
I have my tv working like new.
If you want this time the power supply last, do not turn off, just press tv/video button to switch input source, let the tv in sleep mode.

Nov 03, 2008 | SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready...

1 Answer

Sva HD 4208 111 pdp

The turnoff of the power supply may be a protective measure to prevent fire.
Plasmas use high voltages and these circuits like to fail. If the HV fails and draws excessive current, the type of supply used is capable of protecting itself (and you) by shutting down if the HV circuit or another is drawing more than the design maximum current.
A decent tech should be able to determine fairly quickly if something beyond the supply has expired.

Mar 20, 2008 | SVA-USA HD4208TIIIBU 42 in. HD-Ready...

1 Answer

Tv won't turn on

Just Repaired a HD4208-III with the same problem, found faulty
Relay RLY8002 (Faulty Contacts) Replace both RLY8001 &


Oct 11, 2007 | SVA-USA HD4208TIII-VR 42 in. Plasma...

3 Answers

SVA HD4208 42INCH Plasma will not turn on. Hi! My TV will not turn on. I have a red light lite up by the remote control sensor. When I hit the power button on the remote the red light blinks. Then I hear a...

The issue with these TV's are the boards internally go bad, for Power the three capacitors get round at the top and either you replace the whole board from SVA fro 300.00 or buy three capacitors and replace them

May 05, 2007 | SVA-USA HD4208TIII-VR 42 in. Plasma...

6 Answers

Can't turn on TV

Its probably your power supply failing. Mine did the same thing after about a year and a half. Of course its out of warranty and the shops around town cant get the part, and theres virtually no way to get a hold of SVA. But good luck with it.

May 29, 2006 | SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready...

Not finding what you are looking for?
SVA-USA HD4208TIIIBU 42 in. HD-Ready Plasma Television Logo

Related Topics:

783 people viewed this question

Ask a Question

Usually answered in minutes!

Top SVA-USA Televison & Video Experts

Zaid Anarwala
Zaid Anarwala

Level 3 Expert

457 Answers


Level 3 Expert

85216 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a SVA-USA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides