Question about AOpen CRW5224 (CRW5224 RETAIL) CD-RW Burner

1 Answer

I have installed my crw, but when i try to burn a cd it tells me there is no device able to burn,

If i go into the control panel then add new hardware it tells me that it's already installed, But windows can't specify the resources for this device ( code 27 ) Click the resources tab and then select the basic configuration for the resources this device use's. To see which resoures this device use's see documentation for this device, Well the problem is its second hand so there is no documentation for the rewriter, Also once the rewriter is installed is the cd rom still able to play cd rom games, If you are able to help me i would be blessfully happy as i have been at this for two days now

Posted by samantha christie on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 202 Answers

Http://download.aopen.com.tw/Default.aspx?nothing=nothing&sDropDownCategory=Firmware&sDropDownModel=CRW5224&Language=English&WebSite=GL Download and install the upgraded firmware from the above site. This other site can provode you with the manuals etc. http://global.aopen.com.tw/Products/cdrw/crw5224.htm let me know what happens, Good Luck, Tim

Posted on Feb 16, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Need a driver

you might have to physically unplug the leads for this cd/dvd then plug them back in this will activate the found new hardware wizard or
if your computer came with a motherboard disk the drivers could be on it
click start control panel administrive tools computer management device manager scroll down cd dvd rom drives if you see a yellow question or exclamation mark?! or red x right click to update driver
hope this helps



tip

Hardware install

if you want to install something or if you plug in something and it says device not reconized or new hardware found for long periods of time and you don't have a cd go to control panel then click add hardware this will tell you what to do its easy and very helpful.
on Feb 08, 2010 • Computers & Internet
1helpful
1answer

Hello i have loss my crw 4406eu installing software plz kindly tell me that where ican get

There is no such thing - optical drives use all the same generic driver. If you need a burning program then use this one, it's free.

http://www.softpedia.com/get/CD-DVD-Tools/Data-CD-DVD-Burning/BurnAware-Free.shtml
0helpful
1answer

Error power area on CRW-F1E WILL NOT BURN TO DISC

hello, if you are experiencing "power calibration error" all you need to do is click on control panel>administrative tools>services>imapi cd burning> then set start up type to "disable", >apply>ok, try to burn you cd again
0helpful
2answers

Dvd disk drive not showing in my computer

Hi!

The chances are that the drivers for them got corrupted and you can install them fron your motherboard cd. To install them go to Control panel-> add new hardware-> search for new hardware-> if it shows up then its good else add them from the list. It will then install the drivers from your motherboard cd (the cd you got with your system or from the cd you got with your disk drive).

If this doesn't help then check for the connectors(going into disk drive from power supply and motherboard) by opening your pc.

Please rate the solution.

Thanks
Rylee
0helpful
1answer

CDs will not burn?

go to my computer>properties>hardware>device manager
dvd/r>action then click scan for new hardware changes
0helpful
1answer

2wire wireless usb adapter installation for desktop

If you go to the control panel, there should be a link somewhere where you can add new hardware. Find this, connect the device, and add the hardware.
0helpful
1answer

Cant read any blank discs

The problem likely is not with your hardware--it may not even be detected unless you have a buring program (non-microsoft) installed. check to be sure that you have no yellow checks in your device manager, and and check for any yellow checks for your CD/DVD ROM drives,your sound, video and game controllers. If there are none, your system is go. Your burning software may be corrupted. I recommend a great free program, Belarc Adviser, which will tell you all programs and hardware in your computer, find the CD burning software, like Nero (not backup software) or Roxio, and go to their web sidtes to download pgrades or just redownload them if they aren't working on your computer.
0helpful
1answer

Firmware upgrade

first, try to uninstall the frimware from the add remove programs (Control panel). If it wont help, uninstall the driver and remoe the device (right click on 'my computer' - properties - hardware - device manager)restart the machine and let Windows redetect it. It should have retained the driver and will reload it. Good luck!
Not finding what you are looking for?
AOpen CRW5224 (CRW5224 RETAIL) CD-RW Burner Logo

Related Topics:

324 views

Ask a Question

Usually answered in minutes!

Top AOpen Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Joaquim Martins

Level 3 Expert

1128 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

388 Answers

Are you an AOpen Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...