My lynxr-en is mute. how do i make voice come out of it?

multiple low battery ones in sequence , mean a remote low battery. There is usually only one reporting zone on the remote (panic). That would be why only one zone shows alarm.

FC is Failure to Communicate - meaning the alarm panel is trying to call in to the monitoring center to report an event and cannot do so. The problem could be you no longer have an account with the monitoring center or your phone line is disconnected.

You don't have to connect them but if you really want to there should be one or two zones available on the lynx.

Here http://www.alarmhow.net/manuals/Ademco/Control%20Panels/LynxR/LynxR%20Quick%20Start%20Guide.pdf

and

Here http://www.elitemonitoring.com/docs/pdf/panels/lynxr/LYNXR-ENProgrammingManual.pdf

If you are not receiving any sound on your N?vi 2xx thefirst thing to check is that the sound is not muted. To ensure that your unitssound is not muted please perform the following: Turn the device on Press the Volume button on the 'Where To?', 'View Map'screen Ensure the Mute box is not 'checked' If the mute button is not 'ticked', you will need to changethe voice to ensure that the preset voice is not faulty: Turn the device on Touch the Tool icon Touch Settings Touch Language Touch the language voice next to Voice Scroll through and select another appropriate voice
If changing the voice is not helping you will need to ensure that you arerunning the latest software which can be done by installing a program calledWebUpdater. WebUpdater can be installed via the link below:

http://www8.garmin.com/support/collection.jsp?product=999-99999-27

Once updated please allow the unit to reboot which will ensure the softwaresuccessfully installs.

If you are not receiving any sound on your N?vi 2xx thefirst thing to check is that the sound is not muted. To ensure that your unitssound is not muted please perform the following: Turn the device on Press the Volume button on the 'Where To?', 'View Map'screen Ensure the Mute box is not 'checked' If the mute button is not 'ticked', you will need to changethe voice to ensure that the preset voice is not faulty: Turn the device on Touch the Tool icon Touch Settings Touch Language Touch the language voice next to Voice Scroll through and select another appropriate voice
If changing the voice is not helping you will need to ensure that you arerunning the latest software which can be done by installing a program calledWebUpdater. WebUpdater can be installed via the link below:

http://www8.garmin.com/support/collection.jsp?product=999-99999-27

Once updated please allow the unit to reboot which will ensure the softwaresuccessfully installs.

it sounds like your contact is messed up... deactivate that contact to see if all is well.

your access code plus "off"

yes i can help you who monitors ur system because your gonna need the installer code to get into programming or power down the sytem then hold down the *and # to get into programmming

http://support.microsoft.com/kb/921334/en-us