sorry wrong place ..... so i juste phone the compagny and i tell me to reship the printer ton compagny :(sorry wrong place ..... so i juste phone the compagny and i tell me to reship the printer ton compagny :(
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You connect to your wifi from your printer settings > WiFi setup wizard. It should ask your wifi password when connecting.
Check your manual. If you don't have one here's the link. Epson WorkForce 435 All in One Printer
You have attempted to update your Epson
product using the Epson Driver Update and Download Navigator software
but have found that the product is stuck in Recovery Mode. This message
is displayed on the product's LCD screen and you will be unable to
perform any actions until this issue is resolved.
This error can occur if the firmware update procedure is
interrupted, e.g. accidental powering off the product, cables being
removed or the installation being cancelled.
SOLUTION:
The first method of resolving this problem is to wait for a
few moments and a pop-up should appear on the computer screen, clicking
on the link indicated below will direct you to a tool that will correct
this issue.
In the event that the pop-up mentioned above does not
automatically appear or has been accidentally cancelled, the Firmware
Recovery Tool can be accessed manually. Follow the instructions below:
Go to the Epson Support website and select your product using the drop-down lists presented.
Click Drivers & Software.
Firmware Recovery Tool will be listed, click direct download.
Read the license agreement and tick the I have read and accept these license terms box and click proceed to download if you would like to continue.
Once the download is complete, run the file as normal
for your operating system and follow the on-screen instructions to
complete the firmware update.
(1) i hope you fully installed the network/wireless device software on the host computer and then followed all the on screen instructions.
(2) during the installation program attempts to find the printer.in the mean time turn on your Bluetooth on your phone and attempt to search the printer.
(3) make sure the entered the correct network name and security passkey.
all drivers and software for Epson printers are available on the Epson Support site just type in the web address with a .com and seek support button and search.
Cheers
[please rate our help to keep the FREE service online++++Thanks for using FIXYA
×