Intel SE7520BD2 Motherboard Logo

Question about Intel SE7520BD2 Motherboard

1 Answer

Intel SE7520BD2 Motherboard or Intel Server problem

It was working fine for 5-6 months after suddenly stoped. I don't see any VIDEO at all. It always showing SYSTEM FAULT light ON(At backside and on front panel).I have XION dual on this. SC5300LX chasis. Kingston Memories (1gbx4). I checked with Intel support, I did all -checked without Memory -checked with one Memory module on A1 slot -checked with single Processor -Checked removing all external cards/Floppy/DVD/HDDs/FANS. And strange thing is one of my friend (He is an idiot I agree now) told me that Mother board is faulty, I HAVE NEW MOTHERBOARD (A 700 Euro I spent again)and see my luck it has a same problem !!!!! Now some one can tell me WHERE is the problem ? Pls dnt tell me to check with other SERVER -I DON'T HAVE IT. Please GUIDE-GUIDE-GUIDE. Batman

Posted by Batman Maheta on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 121 Answers

Ok, since you first did this with Intel support, then I'm guessing that they also had you first take out the CPU(s) and then reinstall it... Now have you tried testing the RAM in another computer? Last but not least, have you tried switching out the PSU? You could also try to use a POST probe PCI card, to see if you get any indication of an error, or that POST was actually initiated. Usually, you'll at least get a POST beep letting you know what is the problem, but you didn't state that here, so I'm wondering if that is running as well.

Posted on Mar 26, 2007


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I have a Supermicro P8SCT motherboard when I power it on I get no video

Hello here is the homepage:

When you have a blown cap, on the mainboard i suggest to change them all.

But the price for this, will exeed the price for a new and better mainboard.
A new mainboard cost about 100 dollars, and the cpu aswell.

I suggest you to buy a well known brand like asus or intel.

I`m using asus, and i newer have any problems with that.

Intel is a bit more expensive, than a amd based mainboard.

Good luck

Boards beeps 6-4-4 and nothing happens.

The manual is here:

There is detailed troubleshooting information within the document.

6 seems like a Keyboard controller BAT test error.

It sounds though that your motherboard may be defective :( Going to have to get a new one most likely, sorry :(

What are the front panel pinouts for the Intel Motherboard SE7520BD2?

Here are the requested pinout:
In case you need further details on this specific board, here is an official link for the technical manual.

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
direct FixYa link:

Hi, do you have a new or refurbished SE7520BD2 in stock?

Hello, we are not a parts supplier, we provide tech assist only suggest you contact this web site they can help, the prices are the best i have found on all things computer.

I am having D101GC motherboard. Suddenly sound card stoped working. I purchased PCI sund card and it was working properly for few months and stoped working. I have formated the system and tried installing...

After installing pci soundcard you really should disable the onboard sound through bios as the PC may just have become confused as to which sound its trying to use. Also in control panel under sound devices make sure your soundcard is listed and the mute box is not checked.


Error beep sound on server, conf:Intel server motherboard se7520bd2 2 gb ram scsi harddrive problum:long beep sound in LSI LOGIC CARD

I don't think SCSI card give beep error codes. If you listed this item, most likely this is the problem and your MB is telling u this. Your SCSI card is most likely damaged. Try to make sure it is inserted in the pci slot properly. If it a new one. We rarely use SCSI cards any longer as most Servers have plenty of HDD space and the Hot Swappable options make them easy to replace if they get damaged.

As a tech, I would first check the Mother Board (BIOS) Beep Error codes to determine exactly what the problem is. Those beeps tell u what hardware is malfunctioning.

Troubleshooting an old broken server

remove ram - if no beeps then CPU not working.
Check PCI cards all in properly.

Remove hard disk and CD cables and any other unneccesary connections.

System Fault. No display nor beep sounds.

Here is suggestion: Disconnect the HDDs and other storage devices and then start your machine. If this does not isolate your problem. Try changing the keyboard. Hint: also make sure your motherboard is not touching the metal cabinet anywhere. If so it can cause serious damage to your system.

Ntel SE7520BD2 Motherboard

first of all are you using AGP or Pci video card, or is this intergrated?
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Mehandi Husain ...

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

19163 Answers


Level 3 Expert

85241 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides