Question about HP PSC 1510 All-In-One InkJet Printer

Failure my printer begins its start up then all the lights start flashing rapidly and my pc can no longer see the printer.

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Champion:

An expert who has answered 200 questions.
Expert
202 Answers

EMT, sounds like the printer is having a seizure. You need to unplug the printer from the machine and unplug the electric. Turn off the computer. Plug in the printer electrically(if the printer still blinks furiously the printer is fried) in it turns on normal, plug the printer into the computer and turn on the computer. If the computer boots up the the printer starts spazzing again its the printer drivers(most likley). In that case again unhook and unplug the printer go the the HP site and download the latest and great est drivers and go through the installation process . Tim

Posted on Jan 29, 2007

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Indesit washing machine

Indesit Washing Machine lWB5113 Flashing Lights(Faulty ...

? 3:34
www.youtube.com/watch?v=-lnfePzPwTQ

Jul 29, 2012 - Uploaded by porracaralho caralho
Indesit Washing Machine lWB5113 Flashing Lights(Faulty).mp4 .... older model- stopped in rinse cycle/flashing power and rapid wash lights- ...

How to repair Indesit washing machine that is Flashing ...

? 0:43
www.youtube.com/watch?v=Q9Yq2Cz8UFE

Jun 26, 2011 - Uploaded by XR600RQJ
Washing machine Indesit starts to flash for longer and longer ...How do you unlock the door when the power is off?? every time i turn it ... My washing maschine ( Indesit WITXL 129 ) had the same problem - 6 from 9 LED lights ..

Oct 14, 2015 | Kenmore 24032\24036 Top Load Washer

1 Answer

Power indicator and rpm indicator flashes

See:

Indesit Washing Machine lWB5113 Flashing Lights(Faulty ...

? 3:34
www.youtube.com/watch?v=-lnfePzPwTQ
Jul 29, 2012 - Uploaded by porracaralho caralho Indesit Washing Machine lWB5113 Flashing Lights(Faulty).mp4 .... older model- stopped in rinse cycle/flashing power and rapid wash lights- ...

How to repair Indesit washing machine that is Flashing ...

? 0:43
www.youtube.com/watch?v=Q9Yq2Cz8UFE

Oct 14, 2015 | Washing Machines

1 Answer

How to program in the 3 pre sets for garage door openers We have a 2001 dodge grand caravan es

Hope this a Homelink. Put new batt in garage door remote. Park outside garage. #(1) Press & hold 2 outer buttons on Homelink. Release ONLY after light starts to flash. Don't hold for longer than 30 sec. Don't repeat to program the other 2. #(2) Hold the remote 3 inches from Homelink. #(3) Press & hold the Homelink buttom & the remote button at the same time. #(4)The Homelink will begin to flash slowly then rapidly. After the Homelink flashes rapidly release the buttoms. #(5) Press the just trained Homelink button if the light stays on constantly, programming is complete..... To program the other 2 links DO NOT REPEAT #1

Jan 10, 2010 | 2001 Dodge Grand Caravan

1 Answer

How to program a car remote for an elite gate opener

Push the button you want to use and hold until the light flashes rapidly.Then hold your remote that came with the garage opener close to the visor with the homelink button that was just flashing push the garage remote button untill the light begins to flash rapid again. Then get a ladder and push the learning button on the garage opener motor. Then within 20 seconds get in your car with the key on to the position just before starting the car and hold the button untill it flashes rapidly ....that should do it...that is how it was done for my 1999 528i

Sep 26, 2009 | 2007 BMW 335i Coupe

1 Answer

Sony vaio athlon 2800+ started beeping,one long beep lights flash

listen carefully to the beeps
One Long Beep, One Short Beep= motherboard problems.
One Long Beep, 2 Short Beep= video problems.
One Long Beep, 3 Short Beep= video problems.
Repeated long beeps = memory failure
continious long and short beeps = Cpu overheating

hope this helps

Jan 24, 2009 | Computers & Internet

1 Answer

Guitar hero world tour for ps3

i had the same problem but with trial and error i came up with a soulution
1. Turn on the Playstation 3
2. Plug the dongle for the drum set into an open port on the PS3, the light will begin to flash slowly.
3. Hold down the button (where the light is flashing) on the dongle until it begin flashing very rapidly. Release the button and the light continues to flash rapidly.
4. Hold down the PS button on the drum set until the red light starts flashing rapidly.
5. Within a few seconds you will get a solid light on both the Guitar Hero World Tour Drum Set and the Playstation 3.

thanks

Jan 04, 2009 | Video Game Consoles & Games

1 Answer

I need to know the process on how to program the cars built in gurage door opener on a 2001 chrysler town & country

Hi my name is Allen!

Program a previously trained homelink button as follows... 1. Press and hold the desired pre-programmed HomeLink button for at least 20 seconds (but no longer than 30 seconds) until the indicator light begins to flash. Without releasing the HomeLink button, position the hand-held transmitter 1-3 inches away from the homeLink surface keeping the HomeLink indicator light in view. 2. Using both hands, simultaneously press and hold both the desired HomeLink button and hand held transmitter button (or press and "cycle" - as described in "Gate and Canadian programming"). DO NOT release until the HomeLink indicator light flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapid flashing indicates successful programming) The previous device has now been erased and the new device can be activated by pushing the HomeLink button that has just been programmed. however, it may be necessary to follow steps 5-7 of the "programming" section to complete the rolling code training. This procedure will not affect any other programmed HomeLink buttons.

Dec 20, 2008 | 2001 Chrysler Town & Country

1 Answer

My macbook wont start. you can hear it begin to boot up but then everything stops and the white light flashes rapidly

Try keeping the powerbutton down for several seconds till it reboots. Usually works.

Aug 25, 2008 | Apple MacBook Pro Laptop Computer with...

4 Answers

Program garage door opener

You must first erase what's in the memory.
1.) Simultaneously press both buttons 1 and 3 on the Audi's built-in remote. Hold them until the indicator light flashes (20 seconds or longer).
2.) Now hold your garage door remote close to the Audi remote.
3.) Simultaneously press and hold both your garage door remote button and the button you would like programmed. The indicator light will first flash slowly then rapidly.
4.) You may release both buttons once the light flashes rapidly.

Jul 01, 2008 | 2000 Audi A6

5 Answers