Zenith C27A24T 27" TV Logo

Related Topics:

Question about Zenith C27A24T 27" TV

2 Answers

I am getting double images while watching TV;

When watching I get double images...then it will be fine for a couple of minutes...then it goes back to the double images. This first started a couple of weeks ago and the double images only occurred when I turned it on. After about 5 minutes it would be fine.

It has now started shutting off. It stays on for about 5 minutes then shuts itself off.

Posted by ladyelco66 on

Ad

2 Answers

Keith

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Unpug tv remove rear panel inside will be a large circuit board with a connector on either side which control the left and right of tv, carefully unclip the left side clip, place a small strip of clear celotape (10x20mm) to the left side of left connector, plug in and recheck, some tweaking may be required. Repeat on rhs if required

Posted on Jan 05, 2015

Ad

Trevor Sauna

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

There maybe some loose components on the circuit and that needs resoldering. Bring it to the repair shop to done.

Posted on Dec 02, 2008

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

There is double imaging on my samsung tv, i replaced the tcon board and it still has the double image.

does it go away when the set warms up? or if you tap the set? Sounds like a possible defective LCD panel tab. Samsungs and Sony's are known for this.
0helpful
1answer

When you turn on the the TV the picture is good with in a minute or so the Picture turns wavy and has a double image. I can turn it off, then turn it right back on the picture is good for any where a...

Hello,

The problem with the television is the lamp. It is faulty that is why the screen turns wavy in minutes.

The solution to that is to replace the light and your television will be in good condition once again.

Take care
2helpful
2answers

Mitsubishi WS-55511 convergence problem?

No,need to diagnose.It a 100% convergence problems.Convergence problems very easy diagnose.The picture look like 3D,colors lines don't lines up.Fuzzy,out of focus.Convergence controls don't work to lines up any colors cross.The tech is cheating u if he said cost $125 to diagnose.If u know how to solders u could fix this convergence problems about $100.U can buy a convergence kit at Websites Tv repair World.com,Tvrepairkits.com.The shop everythings fix parts and labors only $300.
4helpful
1answer

I am having problems with my Westinghouse LCD TV. When i 1st turn it on, everything is fine but after a couple minutes I lose picture. The audio is fine and continues on. I unplug the tv from the outlet...

No quick fixes. A component such as a capacitor is heating up and failing. Sometimes a cracked solder connection will work fine until it heats up and no longer sustains the connection.

When the screen goes off, shine a very bright flashlight at the screen to see if the image is still there. In many cases, the problem is the screen backlight, which consists of several CCFL tubes (fluorescent lamps) and a circuit board called the inverter (similar to a lamp ballast).

If the image is there, but the backlight is off, then you just may need a new inverter board.
0helpful
1answer

Tv turns off while watching it stays off a couple

Sharp 60" DLP 1080i , while watching cable, the show blinks off and on. but if we play video games or watch DVD's it works fine. what is wrong?
0helpful
1answer

The image of my 53sbx10b are double after few minute

Replace convergence ics. Hitachi has a ki for this consisting of STK-395-110 ic and some resistors.
1helpful
1answer

Double picture at star up

if you have cable telivison try unpluging the cable from wall and tv the replugging it. make sure the connections are secure and also make sure the cable is plugged in straight. or your cable might be bad.
1helpful
1answer

Panasonic PT-51HX41 rear projection tv showing shadow/double images.

Unplug the TV from the ac wall outlet for about 4 minutes then plug it back in and turn it on. If it still has a double image then tell me if it's affecting the menu screen from the TV (not the cable menu). And is the double image in red and blue?

C-Dog
Not finding what you are looking for?

262 views

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...