Question about La Crosse Measuring Tools & Sensors
If that's not the right manual,you can use the link below, and select the model..If the model is not there, that means the manual is not available...
Posted on Jun 15, 2011
I found this in the manual, simply pressing the RESET button won't start communication again. Try this:
Your main unit displays current, minimum, and
maximum temperature and humidity readings
collected by the remote sensor and main unit.
Outdoor data is collected and displayed every
40 seconds and indoor data is collected and
displayed every 10 seconds.
The red LED flashes whenever the sensor
transmits an RF signal to the receiver.
select sensor or use auto scan
• Press CHANNEL to switch between
• To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data
will be displayed for 3 seconds. To end autoscan,
press CHANNEL or MEMORY.
• Press and hold CHANNEL and MEMORY
simultaneously to search for remote sensors.
resetting the system
The RESET buttons are located on the back of the
main unit and sensor. Use a pointed subject to
press RESET when you change the batteries and
whenever the system malfunctions.
Posted on Jul 13, 2011
Tips for a great answer:
May 01, 2018 | Measuring Tools & Sensors
Feb 06, 2017 | Taylor Health & Beauty
Dec 01, 2014 | Thermor Bios Indoor Outdoor Thermometer...
Nov 20, 2014 | Oregon Scientific Wireless Weather Station...
Feb 03, 2013 | Oregon Scientific Wireless IndoorOutdoor...
Aug 07, 2012 | Springfield Measuring Tools & Sensors
Jul 08, 2011 | La Crosse Measuring Tools & Sensors
Oct 22, 2010 | La Crosse LaCrosse Atomic Digital Wall...
Aug 28, 2010 | Measuring Tools & Sensors
772 people viewed this question
Usually answered in minutes!