F13 means the dryer heater is not working the thermal fuse on top of the dryer that connects inline with the heater is open circuit this is most likely due to the fan dropping and stalling causing the overheat or poor airflow due to a buildup of fluff in the dryer
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Generally the F13 code refers to a water inlet problem, I would get the inlet manifold valve checked, or stating the obvious, is the water turned on and make sure there is no restriction in the hose behind the machine.
This s is how i fixed the F-13 Fault on my Hotpoint WD 640 washer dyer. Simple to fix just see the pictures and explanation. Hope this clears things up Boxie
Control's internal memory may have become corrupted.
1- Press Cancel key. 2- If fault returns disconnect power, wait 30 seconds and reapply power. 3- If the problem persists upon power-up replace the display board.
Hi, that indicates that either the fan motor is not working/ blocked or the dryer thermistor (thermostatic sensor) is playing up. Of course, the pcb reads the sensor so it could also be that causing the error.
Hi. F13 indicates dryer fan motor or thermistor problem
If you can't hear the fan motor running on the dry cycle then it is probably faulty.
Hope this helps.
Please feedback.
Thanks
hi i have the same problemwhat is the solution for this
wilma
×