Question about Dell OptiPlex GX280 PC Desktop

Open Question

Notime tick interrupt - Dell OptiPlex GX280 PC Desktop

Posted by atif_1980_01 on

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cmos beep codes


do you know which bios your computer is running ?

AMI BIOS beep codes 1 beep - DRAM refresh failure
2 beeps - Parity Circuit Failure
3 beeps - Base 64K RAM failure
4 beeps - System Timer Failure
5 beeps - Processor Failure
6 beeps - Keyboard Controller / Gate A20 Failure
7 beeps - Virtual Mode Exception Error
8 beeps - Display Memory Read/Write Failure
9 beeps - ROM BIOS Checksum Failure
10 beeps - CMOS Shutdown Register Read/Write Error

Phoenix BIOS BEEP codes. 1-1-3 CMOS write/read failure.
1-1-4 BIOS ROM checksum error.
1-2-1 System timer failure. (Programmable Interval Timer PIT)
1-2-2 DMA (direct Memory Access) failure.
1-2-3 DMA page register failure.
1-3-1 RAM refresh failure.
1-3-3 64K RAM chip or data line failure.
1-3-4 64K RAM odd/even logic failure.
1-4-1 64K RAM address line failure.
1-4-2 64K RAM parity error.
2-?-? Any beep series starting with 2 beeps indicates a 64K RAM chip or data line error.
3-1-1 Master DMA register test.
3-1-2 Mslave DMA register failure.
3-1-3 Master interrupt mask register failure.
3-1-4 Slave interrupt mask register failure.
3-2-4 Keyboard controller failure.
3-3-4 Screen (video) memory failure.
3-4-1 Screen initialization failure.
3-4-2 Screen retrace failure.
4-2-1 Timer tick interrupt test failure.
4-2-2 Shutdown test failure.
4-2-4 Unexpected interrupt in protected mode.
4-3-1 RAM test failure above address 0FFFFh (64K +)
4-3-3 Interval timer channel 2 test failure.
4-3-4 Time of day clock failure.
4-4-1 Serial port test failure.
4-4-2 Parallel port test failure.
4-4-3 Math Co-processor failure.
BEEP codes may vary dependent upon the revision of BIOS. This list is for reference only

hope this helps

Oct 10, 2012 | Intel Mother Board S5520HCR (988889365963)...

1 Answer

Hi, I have a problem with my Acer Aspire 5732Z laptop. Upon boot up, I get a blue screen saying there is an error with my computer, and the following file name appears: DRIVER_IRQL_NOT_LESS_OR_EQUAL Not...


It seems you have an IRQ conflict. You install a driver and it wants to use an IRQ which is already assigned to a different device. That's why you can start in safe mode because the drivers for your added devices are not loaded.

The computing phrase "interrupt request" (or IRQ) is used to refer to either the act of interrupting the bus lines used to signal an interrupt, or the interrupt input lines on a Programmable Interrupt Controller (PIC). The interrupt request level (IRQL) is the priority of an interrupt request.

In computing, an IRQ conflict is a once common hardware error, received when two devices were trying to use the same interrupt request (or IRQ) to signal an interrupt to the Programmable Interrupt Controller (PIC).

The PIC expects interrupt requests from only one device per line, thus more than one device sending IRQ signals along the same line will generally cause an IRQ conflict that can freeze a computer.

To view your current IRQ assignments you can open Device Manager. Click on START, click on CONTROL PANEL. Click on Performance and Maintenance. Click on System. Click on the Hardware tab. Click the DEVICE MANAGER button. Once you have Device Manager open, select VIEW from the tool-bar menu, and then click Resources by Type. Double click on Interrupt Request (IRQ). If you are experiencing problems with a newly installed/configured piece of hardware and the drivers are installed correctly, then check to see if it has its own IRQ channel.

To change an IRQ setting follow these steps:
-Right click on the device in the list (see above), and then select properties.
-Click the Resources tab.
-Remove the tick from the Use automatic settings option.
-Select a non-conflicting configuration from the pull down box.
-Click OK.

Dec 18, 2010 | Acer Computers & Internet

1 Answer

My Bosch double oven timer is not working. No clock, notimer, but the oven is working fine.


Sure this is the failure off the unit but make sure that the step down transformer for the power to the unit is faulty or burnt. If so replace the transformer. If power goes tto unit without display then the processor can be faulty . Change the clock timer. unit if you need the timings.

Sep 19, 2010 | Bosch HBN 452 / HBN 456 Electric Double...

1 Answer

Its disapeared , i usually talk on camera. but when i turned on laptop its just disapeared. i ticked a button on skype last night asking me to update it.


Please uninstall it and reinstall the skype program, this will definitely fix your problem. The problem must be with the update, perhaps incomplete updates or interrupted updates.. Good luck Thanks for using FixYa.

Jun 10, 2010 | Skype IM

2 Answers

Why always security certificate interrupts gmail


goto tool>option>security>remove all tick mark or restore it and remove all cookies

Apr 19, 2010 | Google Gmail

1 Answer

My daughter has this message on her Dell computer: no timer tick message interrupt, does that mean she needs a new mother board? or is it fixable? thanks


More often this also means that the CMOS battery is drained (the coin shaped cell on the motherboard). Try replacing the coin-cell before considering a motherboard replacement. Also, after replacing the coin-cell, you have to reset the BIOS to its defaults (if it doesn't automatically do it).

Mar 16, 2010 | Dell Dimension 3000 PC Desktop

2 Answers

My laptop freezes with in notime...


pls check the memory/ram and also check if the cpu fan is working well.

Dec 14, 2009 | Sony VAIO VGN-N110G/W Notebook

2 Answers

I put a new fuel pump in my dodge pick up it started and died now wont start


You need to check and see if you have the hoses on backwards,i've done it several times and the same thing always happens,at least now i know why.It makes more work but it's easy to them the wrong.

Nov 05, 2009 | 1997 Dodge Ram 1500 Club Cab

1 Answer

D3d drivers not found


asus x series mother board s have onboard vga (intergater).All most all ways when you play good advance grapic games Eg:NFS most wonted ,NFS prosteet,hallo 2,woled in conflict,crises. In today oll the games are advance grapic.OK bake to problem.you wont be able to run thos games .get advance vga (saparate vga )set up it .You'll be playing in notime...!

Jun 22, 2009 | Intel ASUS X Series Motherboard P4P800-MX...

1 Answer

I have 2 GX520's that are buzzing when trying to boot


If your computer beeps during start-up:
  1. Write down the beep code
Code
Cause
1-1-2
Microprocessor register failure
1-1-3
NVRAM read/write failure
1-1-4
ROM BIOS checksum failure
1-2-1
Programmable interval timer failure
1-2-2
DMA initialization failure
1-2-3
DMA page register read/write failure
1-3
Video Memory test failure
1-3-1 through 2-4-4
Memory not being properly identified or used
3-1-1
Slave DMA register failure
3-1-2
Master DMA register failure
3-1-3
Master interrupt mask register failure
3-1-4
Slave interrupt mask register failure
3-2-2
Interrupt vector loading failure
3-2-4
Keyboard Controller test failure
3-3-1
NVRAM power loss
3-3-2
Invalid NVRAM configuration
3-3-4
Video Memory test failure
3-4-1
Screen initialization failure
3-4-2
Screen retrace failure
3-4-3
Search for video ROM failure
4-2-1
No timer tick
4-2-2
Shutdown failure
4-2-3
Gate A20 failure
4-2-4
Unexpected interrupt in protected mode
4-3-1
Memory failure above address 0FFFFh
4-3-3
Timer-chip counter 2 failure
4-3-4
Time-of-day clock stopped
4-4-1
Serial or parallel port test failure
4-4-2
Failure to decompress code to shadowed memory
4-4-3
Math-coprocessor test failure
4-4-4
Cache test failure

Apr 11, 2009 | Dell OptiPlex GX520 PC Desktop

Not finding what you are looking for?
Dell OptiPlex GX280 PC Desktop Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...