An expert who has achieved level 3 by getting 1000 points
All-Star:
An expert that got 10 achievements.
MVP:
An expert that got 5 achievements.
President:
An expert whose answer got voted for 500 times.
Master
1,284 Answers
Re:
If the picture is jumping from top to bottom this is a vertical issue. The common cause on older Hitacjis is loose connections on the vertical output IC.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no picture condition could be caused by a problem in the horizontal deflection circuit or a power supply failure. A horizontal deflection problem often are followed by open fuses due to shorted components such as a h.o. transistor ofcourse there are a lot more componentd that constitute this circuit. Another no picture condition could be caused by defective convergence power amps. these amps usually give an clear indicator when they are about to quit(color curved or missaligned, double color images etc.) this is a common problem with projection tvs and that is where I would tell the tv tech to start looking.
ok
this is called viedo noise
you will need to replace capisitor Cc10 its Value is 1000uf @ 16v the cap is a filter On Sw +9v Line , on pin 20 of Ic01, ( or corma Jungle IC)
It ended up being the Verizon Fios box. We recycled it and the picture stopped rolling. Thank you for being here to help. If I have any future questions, I'll definitely use your site.
×